TedsWoodworking Plans and Projects

Tag: worm eaten

  • Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    I created likely near to a hundred of these turned wood bud vases among 1993 and 1994, when I was an intern at the St. Croix Everyday living and Environmental Arts Task.

    The vases have been designed from the branches of hardwood trees (mainly mahogany) which had been also little to mill. I would just take a 6-to-8 foot department, bark and all, and slice it into 8 inch extensive sections on a bandsaw. Then I’d carry the box of lower branches around to the lathe and devote the relaxation of the working day turning out bud vases.

    It was fun when I would first hit the bark-covered wood with the chisel, it would make a good deal of sound and sawdust and mildewed bark would fly all over the place.

    It was quite satisfying to develop these pieces, for the reason that the weathered tree branches contained all kinds of irregularities, which include the uninteresting holes remaining by several worms and insects.

    All of the hardwood we employed at St. Croix Leap, was both salvaged from useless trees (hurricane Hugo had left a whole lot of those lying close to), or recovered lawfully and in an ecologically audio fashion, from our landscaping operations.

    Posted by Noah Sussman on 2011-02-21 18:07:37

    Tagged: , wooden , mahogany , lathe , turned , woodcraft , woodworking , department , vase , bud vase , tree department , trees , crafting , handmade , purely natural , mother nature , worm eaten , worm eaten wood , weathered

    #home furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, fantastic woodworking, picket chairs, wooden operating instruments, common woodworking, woodworking guides, woodworking workbench plans

  • Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    I built almost certainly near to a hundred of these turned picket bud vases between 1993 and 1994, when I was an intern at the St. Croix Everyday living and Environmental Arts Task.

    The vases were being made from the branches of hardwood trees (mainly mahogany) which were also small to mill. I would consider a six-to-eight foot department, bark and all, and slice it into 8 inch long sections on a bandsaw. Then I would have the box of slash branches around to the lathe and shell out the rest of the day turning out bud vases.

    It was pleasurable when I’d initially hit the bark-included wood with the chisel, it would make a great deal of sounds and sawdust and mildewed bark would fly just about everywhere.

    It was incredibly fulfilling to generate these parts, since the weathered tree branches contained all kinds of irregularities, which include the monotonous holes remaining by different worms and insects.

    All of the hardwood we applied at St. Croix Leap, was both salvaged from useless trees (hurricane Hugo experienced remaining a large amount of those lying all-around), or recovered lawfully and in an ecologically audio manner, from our landscaping operations.

    Posted by Noah Sussman on 2011-02-21 18:06:13

    Tagged: , wooden , mahogany , lathe , turned , woodcraft , woodworking , branch , vase , bud vase , tree branch , trees , crafting , handmade , purely natural , character , worm eaten , worm eaten wood , weathered

    #furniture #Diy #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, high-quality woodworking, picket chairs, wooden working resources, popular woodworking, woodworking guides, woodworking workbench ideas

  • Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    I manufactured most likely near to a hundred of these turned picket bud vases between 1993 and 1994, though I was an intern at the St. Croix Life and Environmental Arts Venture.

    The vases have been designed from the branches of hardwood trees (typically mahogany) which ended up much too little to mill. I’d take a six-to-8 foot branch, bark and all, and slice it into 8 inch prolonged sections on a bandsaw. Then I would carry the box of slice branches around to the lathe and devote the rest of the working day turning out bud vases.

    It was enjoyable when I’d first hit the bark-included wood with the chisel, it would make a whole lot of sound and sawdust and mildewed bark would fly everywhere.

    It was incredibly enjoyable to deliver these items, for the reason that the weathered tree branches contained all kinds of irregularities, together with the dull holes still left by numerous worms and bugs.

    All of the hardwood we utilised at St. Croix Leap, was possibly salvaged from lifeless trees (hurricane Hugo experienced still left a whole lot of these lying all around), or recovered legally and in an ecologically audio trend, from our landscaping operations.

    Posted by Noah Sussman on 2011-02-21 18:07:09

    Tagged: , wooden , mahogany , lathe , turned , woodcraft , woodworking , department , vase , bud vase , tree branch , trees , crafting , handmade , organic , nature , worm eaten , worm eaten wood , weathered

    #furnishings #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, high-quality woodworking, wooden chairs, wood doing work tools, popular woodworking, woodworking textbooks, woodworking workbench programs

  • Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    I built most likely shut to a hundred of these turned picket bud vases involving 1993 and 1994, even though I was an intern at the St. Croix Life and Environmental Arts Undertaking.

    The vases ended up built from the branches of hardwood trees (largely mahogany) which were being much too smaller to mill. I might take a 6-to-eight foot branch, bark and all, and slice it into eight inch prolonged sections on a bandsaw. Then I’d have the box of minimize branches over to the lathe and invest the rest of the day turning out bud vases.

    It was entertaining when I might initial strike the bark-protected wooden with the chisel, it would make a ton of sounds and sawdust and mildewed bark would fly everywhere.

    It was extremely satisfying to develop these items, mainly because the weathered tree branches contained all varieties of irregularities, which include the unexciting holes left by different worms and bugs.

    All of the hardwood we employed at St. Croix Leap, was possibly salvaged from lifeless trees (hurricane Hugo experienced left a large amount of all those lying about), or recovered legally and in an ecologically seem manner, from our landscaping functions.

    Posted by Noah Sussman on 2011-02-21 18:06:41

    Tagged: , wood , mahogany , lathe , turned , woodcraft , woodworking , department , vase , bud vase , tree branch , trees , crafting , handmade , organic , mother nature , worm eaten , worm eaten wooden , weathered

    #home furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, fantastic woodworking, wooden chairs, wooden performing applications, well-known woodworking, woodworking books, woodworking workbench options

  • Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    Turned mahogany bud vase, made from a weathered tree branch

    Following shaping just about every vase on the lathe, I would set it on the drill push and make a hole in the neck. Then I’d drop a take a look at tube into the gap, so that it was possible to fill the vase with h2o, devoid of detrimental the wood.

    I produced possibly near to a hundred of these turned picket bud vases among 1993 and 1994, when I was an intern at the St. Croix Daily life and Environmental Arts Undertaking.

    The vases have been built from the branches of hardwood trees (typically mahogany) which have been as well compact to mill. I’d just take a six-to-eight foot department, bark and all, and slice it into 8 inch extensive sections on a bandsaw. Then I would have the box of slash branches more than to the lathe and expend the relaxation of the working day turning out bud vases.

    It was exciting when I would to start with hit the bark-lined wooden with the chisel, it would make a ton of noise and sawdust and mildewed bark would fly almost everywhere.

    It was quite enjoyable to make these pieces, because the weathered tree branches contained all sorts of irregularities, like the tedious holes still left by a variety of worms and insects.

    All of the hardwood we made use of at St. Croix Leap, was both salvaged from lifeless trees (hurricane Hugo had left a whole lot of individuals lying close to), or recovered lawfully and in an ecologically sound vogue, from our landscaping operations.

    Posted by Noah Sussman on 2011-02-21 18:08:08

    Tagged: , wood , mahogany , lathe , turned , woodcraft , woodworking , branch , vase , bud vase , tree department , trees , crafting , handmade , normal , character , worm eaten , worm eaten wooden , weathered , glass , tube , glass tube , take a look at tube , drill , gap

    #home furnishings #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wooden planer, high-quality woodworking, wooden chairs, wooden doing work instruments, popular woodworking, woodworking books, woodworking workbench options