TedsWoodworking Plans and Projects

Tag: veneers

  • Port Hadlock WA – Boat School – Contemporary – Sentinal-24 – rolled rightside up, on yacht stands

    Port Hadlock WA – Boat School – Contemporary – Sentinal-24 – rolled rightside up, on yacht stands

    Port Hadlock WA - Boat School - Contemporary - Sentinal-24 - rolled rightside up, on yacht stands

    This is the to start with boat in the Sentinal-24 course of built by Stephens/Waring Yacht Style of Belfast, Maine (SWYD) www.stephenswaring.com .

    The Sentinal-24 class is built to be a comfortable and attractive sloop with the beautiful strains of yesterday’s classics paired with modern-day underbody structure and condition-of-the artwork rigging.

    This vessel represents Stephens Waring Yacht Design’s signature strategy to distinct, enjoyment and large general performance sailing with additional than a touch of historic grace.

    The boat was developed for business output. Thus much, Stephens Waring Yacht Layout has licensed only the Northwest College of Wooden Boatbuilding to develop the style and design in present day cold-molded wooden design in just the School’s Modern Boatbuilding program. The College will call their model, hull range one, the Sentinal course-24, and expects to launch Whisper late in the summer time of 2013 for display at the Wood Boat Pageant in Port Townsend WA in September, 2013.

    The chilly-molded hull is just less than 24 ft very long in general, with 19 ft 4-inches on the waterline and a most beam of 8 ft on a draft of 4 toes 4 inches, displacing 2,850 with two crew. The sloop will have 300 sq. feet of sail on a contemporary rig.

    The open cockpit measures above 8 toes lengthy, and was designed for a social gathering of 4 with a good deal of elbow room. The open up cockpit structure is normal and combines a commanding tiller steering arrangement for final steering sense, though an alternate deck arrangement has been drawn to satisfy those wanting for a little cuddy and ample accomodation for an right away excursion. The 24 will accomodate wheel steering with the modified cockpit as an enhance.

    Clean line management qualified prospects to the simplified management and trimming of sail, all ergonomically located ahead at the base of the mast. This final results in a spare and restrained structure to make sure the boat is as uncomplicated as possible to tackle. The typical rig is a backstay-fewer rig making use of a square-topped mainsail. For sailors who are not yet believers in square-topped mains, a additional convention al sloop arrangement is offered by Stephens Waring Yacht Style and design, given that the Signature-24 is a terrific system for each and every owner’s customized decisions.

    The Northwest University of Picket Boatbuilding is situated in Port Hadlock WA, on the Olympic Peninsula, and is a private, accredited non-profit vocational university.

    Our mission is to train and preserve the good artwork of picket boatbuilding and regular maritime crafts. We build equally commissioned and speculative boats for sale whilst instructing students boatbuilding the expertise they require to perform in the marine trades.

    You can find us on the world-wide-web at www.nwboatschool.org .

    You can achieve us via e-mail at info@nwboatschool.org or by calling us at 360-385-4948.

    Posted by Northwest Faculty of Picket Boatbuilding on 2013-03-29 06:21:15

    Tagged: , Northwest University of Wooden Boatbuilding , Boat College , NWSWB , NWSWBB , NWSB , NW Boat College , Wood Boat College , Port Hadlock , WA , Washington , Olympic Peninsula , Pacific Northwest , Puget Seem , Jefferson County , East Jefferson County , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , marine , vocational , vocational teaching , wooden , wooden , boat , boatbuilding , woodworking , wooden store , boat shop , wood boat , rowboat , picket boats , Sentinal 24 , Signature-24 , Signature Series , Signature Series Yachts , cold-molded , up to date , Sean Koomen , SWYD , composite , veneer , veneers , Paul Waring , Robert Stephens , Stephens Waring Yacht Design

    #home furnishings #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wooden planer, fine woodworking, picket chairs, wooden functioning equipment, well known woodworking, woodworking books, woodworking workbench plans

  • Port Hadlock WA – Boat School – Hadlock 23 powerboat

    Port Hadlock WA – Boat School – Hadlock 23 powerboat

    Port Hadlock WA - Boat School - Hadlock 23 powerboat

    The cold-molded Hadlock 23, intended by famed Canadian designer Paul Gartside for the University and developed underneath the course of teacher Pat Mahon in the 2005 Up to date class, is found in this article in front of the Westrem Shop on the Reduce Campus through the summer season of 2007.

    This boat was the topic an article published by teacher Patrick J. Mahon in the January/February 2007 situation of WoodenBoat journal.

    The owner utilizes it to commute in between Bainbridge Island and Seattle.

    The Northwest University of Wooden Boatbuilding is located in Port Hadlock WA and is a personal, accredited non-gain vocational college.

    Our mission is to teach and preserve the capabilities and crafts of fine wood boatbuilding and other traditional maritime crafts.

    You can find us on the world-wide-web at www.nwboatschool.org .

    You can arrive at us by using e-mail at info@nwboatschool.org or by calling us at 360-385-4948

    Posted by Northwest University of Wooden Boatbuilding on 2013-01-04 01:13:49

    Tagged: , Northwest University of Picket Boatbuilding , Boat School , Port Hadlock , WA , Washington , Olympic Peninsula , Pacific Northwest , Puget Audio , Jefferson County , East Jefferson County , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , marine , vocational , vocational teaching , wooden , wood , boat , boatbuilding , woodworking , wooden store , boat store , Present-day Boatbuilding , Hadlock-23 , Paul Gartside , composite , composite construction , composite boatbuilding , veneers , chilly-molded , composite wooden construction

    #furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, fantastic woodworking, wood chairs, wood working instruments, common woodworking, woodworking guides, woodworking workbench ideas

  • Port Hadlock WA – Boat School – Contemporary – Building the Basket Mold for the Bangor Packet

    Port Hadlock WA – Boat School – Contemporary – Building the Basket Mold for the Bangor Packet

    Port Hadlock WA - Boat School - Contemporary - Building the Basket Mold for the Bangor Packet

    The Contemporary boatbuilding class is making a basket mildew on which to lay up the Joel White-intended Bangor Packet, a rough drinking water rowing wherry. Basket molds are utilised when only a number of layups are demanded.

    We designed the boat of three levels of slender veneers above a basket mildew. The boat, with its sliding seat, weighs about 100 lbs.

    The Bangor Packet was built by Joel White. The wiki entry on this immensely gifted designer hardly does him justice. en.wikipedia.org/wiki/Joel_White

    WoodenBoat magazine is also a terrific source of information and facts about Joel White, his lifestyle and designs. www.woodenboat.com

    Joel White’s obituary, in the New York Occasions, supplies an outstanding overview of this gifted designer. www.nytimes.com/1997/12/10/sports/joel-white-66-designer-…

    The Northwest College of Wooden Boatbuilding is situated in Port Hadlock WA, on the Olympic Peninsula, and is a personal, accredited non-income vocational school.

    Our mission is to educate and preserve the fantastic art of picket boatbuilding and traditional maritime crafts.

    You can locate us on the net at www.nwboatschool.org .

    You can access us by way of e-mail at information@nwboatschool.org or by contacting us at 360-385-4948.

    Posted by Northwest Faculty of Wooden Boatbuilding on 2012-09-23 18:00:03

    Tagged: , Northwest Faculty of Wooden Boatbuilding , County , Hadlock , Olympic Peninsula , Boat School , NWSWB , NWSWBB , NWSB , NW Boat Faculty , Wooden Boat School , Port Hadlock , WA , Washington , Pacific Northwest , Puget Seem , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , maritime , vocational , vocational instruction , wood , wood , boat , boatbuilding , woodworking , wood shop , boat store , Bruce Blatchley , Instructor Bruce Blatchley , chilly molded , Joel White , Designer Joel White , Bangor Packet , rowing , rowing wherry , wherry , veneers

    #furnishings #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, wonderful woodworking, wooden chairs, wooden working equipment, well-liked woodworking, woodworking books, woodworking workbench options

  • Port Hadlock WA – NWSWBB – Contemporary – Bangor Packet – Measuring for deck beams

    Port Hadlock WA – NWSWBB – Contemporary – Bangor Packet – Measuring for deck beams

    Port Hadlock WA - NWSWBB - Contemporary - Bangor Packet - Measuring for deck beams

    This is the Joel White-intended Bangor Packet, a sliding seat rowing wherry, less than construction in Instructor Bruce Blatchley’s Contemporary (wood composite) class.

    This pupil is identifying how to reduce the carlin notches for the deck beams.

    We created the boat of 3 layers of skinny veneers more than a basket mould. The boat, with its sliding seat, weighs about 100 lbs ..

    For more on Joel White, please see en.wikipedia.org/wiki/Joel_White

    WoodenBoat magazine is also a good source of data about Joel White, his lifetime and types. www.woodenboat.com

    Joel White’s obituary, in the New York Moments, offers an great overview of this proficient designer. www.nytimes.com/1997/12/10/sports activities/joel-white-66-designer-…

    The Northwest University of Wood Boatbuilding is positioned in Port Hadlock WA, on the Olympic Peninsula, and is a personal, accredited non-gain vocational university.

    Our mission is to train and protect the fine art of picket boatbuilding and conventional maritime crafts.

    You can obtain us on the web at www.nwboatschool.org .

    You can attain us via e-mail at info@nwboatschool.org or by contacting us at 360-385-4948.

    Posted by Northwest Faculty of Wooden Boatbuilding on 2012-09-24 04:45:51

    Tagged: , Northwest University of Wooden Boatbuilding , Boat Faculty , wood , wood , boat , boatbuilding , woodworking , Port Hadlock , WA , Washington , Olympic Peninsula , NWSWB , NWSWBB , NWSB , NW Boat University , Wooden Boat University , Pacific Northwest , Puget Audio , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , maritime , vocational , vocational schooling , wood shop , boat store , Bruce Blatchley , Teacher Bruce Blatchley , cold molded , Joel White , Designer Joel White , Bangor Packet , rowing , rowing wherry , wherry , veneers

    #home furnishings #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, wonderful woodworking, picket chairs, wood working instruments, popular woodworking, woodworking textbooks, woodworking workbench designs

  • The Bangor Packet rowing wherry off the mold – – IMG_3441

    The Bangor Packet rowing wherry off the mold – – IMG_3441

    The Bangor Packet rowing wherry off the mold - - IMG_3441

    This is the Joel White-made Bangor Packet, a sliding seat rowing wherry, below building in Instructor Bruce Blatchley’s Modern (wooden composite) class.

    We built the boat of three levels of slim veneers more than a basket mold. The boat, with its sliding seat, weighs about 100 lbs ..

    The boat has been taken off from the mould around which it was constructed and has been turned upright so that we can end the interior and install the decks.

    For far more on Joel White, make sure you see en.wikipedia.org/wiki/Joel_White

    WoodenBoat magazine is also a wonderful source of information and facts about Joel White, his lifetime and styles. www.woodenboat.com

    Joel White’s obituary, in the New York Moments, provides an fantastic overview of this talented designer. www.nytimes.com/1997/12/10/sporting activities/joel-white-66-designer-…

    The Northwest School of Wood Boatbuilding is found in Port Hadlock WA, on the Olympic Peninsula, and is a personal, accredited non-profit vocational faculty.

    Our mission is to train and protect the good art of wood boatbuilding and common maritime crafts.

    You can uncover us on the world wide web at www.nwboatschool.org .

    You can get to us through e-mail at info@nwboatschool.org or by contacting us at 360-385-4948.

    Posted by Northwest University of Picket Boatbuilding on 2011-04-21 16:06:37

    Tagged: , Northwest School of Wooden Boatbuilding , Boat College , wood , wood , boat , boatbuilding , woodworking , Port Hadlock , WA , Washington , Olympic Peninsula , Pacific Northwest , Puget Sound , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , maritime , vocational , vocational coaching , wooden shop , boat store , Bruce Blatchley , Instructor Bruce Blatchley , cold molded , Joel White , Designer Joel White , Bangor Packet , rowing , rowing wherry , wherry , veneers

    #home furnishings #Diy #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wooden planer, good woodworking, wood chairs, wood doing the job equipment, well-known woodworking, woodworking publications, woodworking workbench ideas