Tag: pulls

The writer of this content is using a lathe for their work. They have clamped an item into a 3-jaw chuck and are using a cut off tool to separate a part of the item from the rest. They mention that they recently added a 1.235 inch riser to the motor/spindle assembly of their lathe to allow them to use a short parting tool holder. This is significant because it means they are trying to improve their equipment to make their work easier or more efficient. They also note that they haven’t done any parting work in a while.

Overall, this content is fairly short and doesn’t provide a lot of detail about the work being done or how it fits into a larger context. However, it does give a glimpse into the writer’s process and some of the challenges they are facing. It also highlights the importance of having the right tools and equipment for a job, as well as the need to periodically make upgrades or modifications to ensure continued success.

Posted by gfixler on 2008-09-22 11:02:48

I’m sorry but there isn’t enough context provided to summarize this content accurately. Please provide more information.

Posted by gfixler on 2008-09-22 11:18:20

This content describes a person’s experience with knob pulls on a small TV stand. The writer describes how the original length of the knobs was too long for the small doors on the stand and made them look silly. The writer then shortened the knobs to better fit the size of the doors.

Posted by gfixler on 2008-09-22 11:09:43

The author of this content has conducted some tests with wood stains which they picked up, but unfortunately they did not work as expected. These stains were applied to 1/4″ panels of poplar- the same type of wood that the side cabinets of their TV stand unit were made of. However, the color of the stains did not match with the main TV stand unit, resulting in a clash of colors.

The use of wood stains is common in woodworking projects as they enhance the natural beauty of wood and give it a uniform finish. However, selecting the right wood stain can be challenging as different wood species and finishes may react differently with various stains. Moreover, the effects of stain on wood can change with time, making the selection of the stain even more challenging.

In this case, the author was disappointed with the outcome of their wood staining experiment. Perhaps they did not conduct research on the recommended stains for poplar wood or the application technique used was not appropriate. Alternatively, it could be that the selected stains were simply not suitable for poplar wood.

Regardless of the reason, it is clear that the author was left with an unwelcome discrepancy in their wood finishes, resulting in a clash of colors between the TV stand unit and the side cabinets. It would seem that, in the future, researching and selecting wood stains more deliberately will be an important step towards ensuring a cohesive finished product.

Posted by gfixler on 2008-09-22 11:25:49

The article discusses the benefits of using a mini lathe to turn down the length of screws. More specifically, it highlights a case where a shorter screw was needed, but the original length of the screw was too long for the desired outcome. The author explains that they were able to use their mini lathe to turn down the length of the screw to make it suitable for the intended use.

The author begins by stating that they had a situation where they needed to use shorter screws than what was available. They explain that while there were longer screws available, they needed to be shortened to avoid interference with other components. The author notes that they had a mini lathe available and decided to use it to modify the screws.

The author then provides a step-by-step guide on how to use a mini lathe to turn down the length of a screw. They explain that the first step is to clamp the screw in the lathe chuck. They caution against clamping the screw too tightly, as this can cause damage to the threads. The author then recommends using a center drill to create a small indentation on the end of the screw, which can help keep the drill centered during the turning process.

Next, the author explains that they turned down the length of the screw using a cutting tool. They note that it is important to take small cuts and check frequently to ensure that the screw is the desired length. The author emphasizes the importance of patience during this process, as rushing can lead to mistakes.

Finally, the author notes that while using a mini lathe to turn down screw lengths is a useful technique, it is not always necessary. They explain that there are a variety of screws available in different lengths and sizes that may be suitable for a given application. However, the author points out that having the ability to modify screws with a mini lathe can be useful in situations where specific lengths or sizes are not readily available.

Overall, the article provides a useful guide to using a mini lathe to turn down screw lengths. The author’s step-by-step instructions and emphasis on patience make the process seem manageable for those with access to a mini lathe. Additionally, the article’s recognition that this technique is not always necessary helps put the process into context and highlights alternative solutions.

Posted by gfixler on 2008-09-22 11:07:06