TedsWoodworking Plans and Projects

Tag: pocket

  • “Getting Ready for Staining”

    Preparing for Stain

    The bookcase project involved staining shelves, uprights, tops, and bottoms. The first step in the process was to mask the areas that were not going to be stained. This helped to prevent any accidental staining in areas that were not intended to be colored.

    Once the masking was complete, the shelves, uprights, tops, and bottoms were laid out to be stained. It is essential to ensure that the surfaces are clean and free of any dust, dirt, or debris before staining.

    The staining process involved applying a generous coat of stain to each surface, using a paintbrush or a staining pad. The stain was allowed to set for a few moments before wiping away any excess with a clean cloth. This helped to ensure an even application of the stain.

    After the stain had dried, the surfaces were sanded lightly with fine-grit sandpaper to remove any rough spots or imperfections. This also helped to create a smooth surface that would be easy to paint or varnish.

    Once the surfaces were smooth, they were ready for the next step – assembly. The shelves were attached to the uprights, and the tops and bottoms were secured in place. The entire bookcase was then sanded lightly to create a cohesive finish.

    Finally, a protective coat of varnish was applied to the surfaces to help preserve the wood and prevent any scratches or damage. The varnish also provided a glossy finish that added to the bookcase’s overall appearance.

    In conclusion, the bookcase project involved staining, assembly, and varnishing of shelves, uprights, tops, and bottoms to create a beautiful and functional bookshelf. The process required attention to detail and patience but resulted in a stunning finished product that would be cherished for years to come.

    Posted by greg_guarino on 2013-01-19 04:18:03

  • Getting Ready for Staining

    Preparing for Stain

    The Bookcase Project is a woodworking project that involves building a bookcase with a gap beneath its shelves to allow for both sides of the wood planks to be stained. This project is a bit more complex than a standard bookcase build but it produces a more impressive and unique piece of furniture.

    The purpose of the gap beneath the shelves is to allow for both sides of the wood to be stained. When building a standard bookcase, the wood is usually only stained on the visible side facing out. However, with the Bookcase Project, the gap beneath the shelves allows the wood to be flipped over and stained on the opposite side as well. This creates a more consistent appearance and adds a touch of craftsmanship to the piece.

    The project requires several materials including wood planks, wood glue, wood screws, a circular saw, a table saw, a power drill, wood stain, and polyurethane. It is important to choose high-quality wood for the project as it is the centerpiece of the bookcase.

    The first step in building the bookcase is to cut the wood planks to the proper length and width. Once the planks are cut, they are then sanded to a smooth finish. The next step is to drill holes into the wood where the screws will be attached. The holes should be drilled at an angle to ensure that the screws hold the wood planks together in a secure manner.

    Once the holes are drilled, wood glue is applied to the edges of the planks and they are then clamped together. The clamps should be left on for at least an hour to allow the glue to dry and the wood to bond together.

    After the glue has dried, the bookcase is then cut into its final shape using a circular saw. This includes cutting the side pieces, top piece, and bottom piece. The shelves are then cut to size using a table saw.

    Before assembling the bookcase, the wood is stained with a wood stain of your choice. This is where the gap beneath the shelves comes into play. The wood is stained on one side and then flipped over to stain the other side through the gap beneath the shelves. This ensures a consistent appearance and covers all sides of the wood.

    After the wood has been stained and allowed to dry, the bookcase is then assembled by attaching the shelves to the side pieces using wood screws. The top and bottom pieces are then attached in the same manner. The bookcase can then be finished with a coat of polyurethane to protect the wood.

    The Bookcase Project is a rewarding woodworking project that produces a high-quality and unique piece of furniture. While it requires a bit more work than a standard bookcase build, the gap beneath the shelves adds a touch of craftsmanship and ensures a consistent appearance on all sides of the wood. With the right tools and materials, anyone can take on the Bookcase Project and create a beautiful piece of furniture for their home.

    Posted by greg_guarino on 2013-01-19 04:17:01

  • Test for Stains

    Stain Test

    Unfortunately, as an AI language model, I cannot summarize without further context on the content. Please provide the necessary details so I can assist you better.

    Posted by greg_guarino on 2012-12-28 02:29:54

  • Final Stages of Steel Wool and Rubbing

    Final Steel Wool & Rubbing

    As an AI language model, I cannot summarize a content to 2000 words as that is the same as the original article. Can you please provide more specific instructions on how you want me to summarize the content? Thank you.

    Posted by greg_guarino on 2013-01-28 03:46:01

  • Stop at a Certain Depth

    Depth Stop

    The author of this piece has attached a scrap of wood to their saw jig to ensure that the blade only cuts to the depth necessary for their current project. This was accomplished by attaching a 1×2 piece of scrap wood to the jig, which is now the appropriate length to allow the author to cut both 1×2 and 1×3 materials as needed.

    Posted by greg_guarino on 2013-01-20 20:01:41