Tag: mortise

We harvest basketball courts from educational facilities. Evidently each 20-50 many years colleges swap 10s of thousands of sq. ft of gymnasium flooring and ordinarily throw it away. Admittedly it is a bit of a pain to reuse in residential settings (but undoubtedly quite if the effort and hard work is set in) and sizeable quantities of this product have been employed to make counters and tables desks and bar tops. For these shoppers they needed a health club ground desk and we observed a uncommon piece that nonetheless had its graphics. We uncovered a pair of aged 1950s conference desk legs and developed a table all-around the piece…together with obtaining the graphics wrap all over on the skirt.

The flooring is rock maple nailed into sleepers (essentially 2×3 ). I stapled 3/4 in plywood strips to the bottom prior to eradicating the sleepers. Following the sleepers were eradicated I set some minimal profile stiffeners created of extra parts of strip maple turned sideways. The apron was also manufactured from added items of maple. In this case I applied the items with the graphics to generate the waterfall effect. Because the maple is tongue and groove I have to piece jointly items on the groove side for the reason that they’d normally be backward. The corners have been made with a mortise and tenon joint. THe apron is brad nailed into the flooring and blocks glued and stapled beneath all around the edges,
The legs from the aged convention desk have been sanded primed and repainted with shiny white enamel paint. The top and sides are sanded with 220 grit paper and coated with satin, water-dependent polyurethane. Care is taken to not remove the patina and where ever cuts and sanding exposed new wood..time and sunlight will inevitably even it out.

Posted by ianulimac on 2021-01-10 02:18:25

Tagged: , Reuse Action , reuseaction.com , reuse , reclaim , upcycle , recycle , rock maple , ground , basketball court , strip flooring , table , conversion , maple , woodwork , craft , store , woodshop , mortise , tenon , personalized , handmade , reliable , Buffalo , NY

#household furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, fine woodworking, wood chairs, wood working applications, well-liked woodworking, woodworking publications, woodworking workbench designs

We harvest basketball courts from educational institutions. Apparently every single 20-50 many years colleges switch 10s of 1000’s of square toes of gymnasium flooring and normally throw it absent. Admittedly it is a bit of a suffering to reuse in residential configurations (but unquestionably rather if the exertion is put in) and significant amounts of this materials have been utilised to make counters and tables desks and bar tops. For these consumers they needed a health and fitness center floor desk and we discovered a rare piece that nevertheless had its graphics. We identified a pair of old 1950s meeting desk legs and made a desk all over the piece…including obtaining the graphics wrap close to on the skirt.

The flooring is rock maple nailed into sleepers (effectively 2×3 ). I stapled 3/4 in plywood strips to the bottom prior to eradicating the sleepers. Right after the sleepers were removed I put some lower profile stiffeners manufactured of additional parts of strip maple turned sideways. The apron was also created from added pieces of maple. In this circumstance I used the pieces with the graphics to develop the waterfall influence. Mainly because the maple is tongue and groove I have to piece alongside one another items on the groove side because they’d if not be backward. The corners were produced with a mortise and tenon joint. THe apron is brad nailed into the ground and blocks glued and stapled beneath all-around the edges,
The legs from the old conference table have been sanded primed and repainted with glossy white enamel paint. The best and sides are sanded with 220 grit paper and coated with satin, h2o-based mostly polyurethane. Treatment is taken to not remove the patina and where ever cuts and sanding uncovered new wood..time and solar will sooner or later even it out.

Posted by ianulimac on 2021-01-10 02:18:28

Tagged: , Reuse Action , reuseaction.com , reuse , reclaim , upcycle , recycle , rock maple , ground , basketball courtroom , strip flooring , desk , conversion , maple , woodwork , craft , store , woodshop , mortise , tenon , custom , handmade , reliable , Buffalo , NY

#home furnishings #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, high-quality woodworking, picket chairs, wood performing tools, preferred woodworking, woodworking publications, woodworking workbench plans

We harvest basketball courts from faculties. Apparently each 20-50 many years colleges change 10s of countless numbers of sq. feet of gymnasium flooring and ordinarily toss it absent. Admittedly it is a bit of a soreness to reuse in residential configurations (but unquestionably fairly if the hard work is place in) and sizeable quantities of this content have been applied to make counters and tables desks and bar tops. For these shoppers they required a health club floor table and we identified a exceptional piece that still had its graphics. We found a pair of aged 1950s convention table legs and designed a table all around the piece…such as having the graphics wrap all around on the skirt.

The flooring is rock maple nailed into sleepers (fundamentally 2×3 ). I stapled 3/4 in plywood strips to the base prior to eliminating the sleepers. Following the sleepers have been eliminated I set some small profile stiffeners manufactured of more items of strip maple turned sideways. The apron was also made from further pieces of maple. In this circumstance I utilised the parts with the graphics to develop the waterfall impact. For the reason that the maple is tongue and groove I have to piece together pieces on the groove facet for the reason that they’d or else be backward. The corners have been built with a mortise and tenon joint. THe apron is brad nailed into the flooring and blocks glued and stapled beneath all-around the edges,
The legs from the aged convention desk had been sanded primed and repainted with glossy white enamel paint. The best and sides are sanded with 220 grit paper and coated with satin, water-based polyurethane. Care is taken to not get rid of the patina and anywhere cuts and sanding uncovered new wooden..time and solar will ultimately even it out.

Posted by ianulimac on 2021-01-10 02:18:26

Tagged: , Reuse Action , reuseaction.com , reuse , reclaim , upcycle , recycle , rock maple , flooring , basketball courtroom , strip flooring , table , conversion , maple , woodwork , craft , store , woodshop , mortise , tenon , customized , handmade , authentic , Buffalo , NY

#home furnishings #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, fine woodworking, wood chairs, wood functioning resources, popular woodworking, woodworking books, woodworking workbench plans

We harvest basketball courts from universities. Evidently each individual 20-50 years educational facilities replace 10s of hundreds of square toes of gymnasium flooring and commonly toss it away. Admittedly it is a bit of a pain to reuse in household configurations (but certainly fairly if the hard work is place in) and considerable quantities of this materials have been utilised to make counters and tables desks and bar tops. For these customers they preferred a gymnasium ground table and we located a scarce piece that continue to had its graphics. We found a pair of old 1950s convention table legs and designed a table about the piece…including owning the graphics wrap about on the skirt.

The flooring is rock maple nailed into sleepers (fundamentally 2×3 ). I stapled 3/4 in plywood strips to the bottom prior to removing the sleepers. Immediately after the sleepers were being taken off I put some low profile stiffeners designed of further parts of strip maple turned sideways. The apron was also made from extra parts of maple. In this situation I utilised the parts with the graphics to make the waterfall influence. For the reason that the maple is tongue and groove I have to piece with each other pieces on the groove aspect simply because they’d normally be backward. The corners were being built with a mortise and tenon joint. THe apron is brad nailed into the ground and blocks glued and stapled beneath all around the edges,
The legs from the old conference desk were sanded primed and repainted with glossy white enamel paint. The top and sides are sanded with 220 grit paper and coated with satin, h2o-primarily based polyurethane. Care is taken to not take away the patina and wherever cuts and sanding uncovered new wooden..time and sunlight will at some point even it out.

Posted by ianulimac on 2021-01-10 02:18:27

Tagged: , Reuse Action , reuseaction.com , reuse , reclaim , upcycle , recycle , rock maple , flooring , basketball court , strip flooring , table , conversion , maple , woodwork , craft , store , woodshop , mortise , tenon , custom , handmade , authentic , Buffalo , NY

#furnishings #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, fantastic woodworking, wood chairs, wooden functioning equipment, well-known woodworking, woodworking guides, woodworking workbench designs