TedsWoodworking Plans and Projects

DIY Woodworking Projects

Tag: molds

  • Caledonia Yawl – molds set up, backbone in place

    Caledonia Yawl – molds set up, backbone in place

    Caledonia Yawl - molds set up, backbone in place

    The Caledonia Yawl was built by Iain Oughtred for design in glued lapstrake marine plywood, and is one particular of his most common patterns.

    It is 19′ 6″ extensive with a beam of 6′ 1″. She’ll attract about 11 inches with the centerboard up and 3′ 6″ with the centerboard down. The boat weighs about 350 lbs in its “as-developed” configuration, and can quickly be tailored to an owner’s needs. It can be built as a sloop (one particular mast) or yawl (two masts).

    Oughtred’s e-book, Clinker Plywood Boatbuilding Guide clarifies his procedures for making these gorgeous, practical boats. Even though his solutions differ a bit from ours, both of those produce superlative effects. www.amazon.com/Clinker-Plywood-Boatbuilding-Guide-Oughtr…

    Nic Compton’s biography of Iain Oughtred, A Lifetime in boats, captures this complex, enigmatic designer. www.woodenboatstore.com/products/325-144

    ” Late at night, out in the workshop, builder’s of Iain’s boats have normally admitted to inner thoughts of invisible organization, of remaining component of anything significantly even larger a sturdy sense that in the act of doing work with these magnificence they way too have turn out to be aspect of that wonderful pantheon of boatbuilders. -Robert Ayliffe, founder, Duck Flat Wooden Boats

    The Northwest University of Wood Boatbuilding is situated in Port Hadlock WA, on the Olympic Peninsula, and is a personal, accredited non-income vocational college. Our mission is to educate and maintain the good artwork of picket boatbuilding and classic maritime crafts. You can find us on the world-wide-web at www.nwboatschool.org .

    You can reach us by way of e-mail at facts@nwboatschool.org or by contacting us at 360-385-4948.

    Posted by Northwest University of Picket Boatbuilding on 2009-01-27 21:47:59

    Tagged: , boatbuilding , woodworking , Northwest School of Wood Boatbuilding , Boat School , Port Hadlock , WA , Washington , Olympic Peninsula , Pacific Northwest , Puget Audio , Jefferson County , East Jefferson County , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , marine , vocational , vocational teaching , wooden , wooden , boat , wood shop , boat store , composite boatbuilding , composite building , glued lapstrake , glued lap , Modern boatbuilding , wood composite , maritime plywood , molds , backbone , stem , transom , keel , Iain Oughtred , Oughtred

    #household furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, high-quality woodworking, wood chairs, wood functioning resources, well-liked woodworking, woodworking publications, woodworking workbench plans

  • Sliver – finishing the deck mold, beginning to set up the hull molds

    Sliver – finishing the deck mold, beginning to set up the hull molds

    Sliver - finishing the deck mold, beginning to set up the hull molds

    Sliver is a 62-foot sloop created as a minimalist working day sailor. It was designed by the renowned designer Robert Perry for a consumer below in the Pacific Northwest. www.perryboat.com/

    It is a strip-planked wooden hulled composite working day sailor being created by Up to date course pupils at the Northwest University of Picket Boatbuilding in Port Hadlock WA. Design began in April, 2011. This is the deck mildew, on the lookout ahead from the stern. The deck and property will be built upside-down of fiberglass-covered foam on this floor, which is in convert supported by the molds established up on the building jig. Here, we see the deck mildew practically total, even though the development jig for the hull is remaining levelled prior to environment up the hull molds.

    www.perryboat.com/webpage/bio

    Bob Perry has been extremely happy with the School’s development on the boat, and has remarked a lot more than as soon as that he feels we are undertaking a superlative occupation on the construction.

    The boat was constructed on molds cut by Turn Stage Style in Port Townsend. turnpointdesign.com/

    The hull is western pink cedar sheathed in 24-ounce fiberglass. WEST Method solutions have been made use of throughout the project. www.westsystem.com/ss/

    The Northwest Faculty of Wooden Boatbuilding is found in Port Hadlock WA, on the Olympic Peninsula, and is a private, accredited non-revenue vocational university.

    Our mission is to train and protect the fine art of wood boatbuilding and traditional maritime crafts.

    You can obtain us on the website at www.nwboatschool.org .

    You can attain us by way of e-mail at facts@nwboatschool.org or by contacting us at 360-385-4948.

    Posted by Northwest School of Wood Boatbuilding on 2011-06-20 20:39:26

    Tagged: , Northwest University of Picket Boatbuilding , Boat college , boat , college , Port Hadlock , WA , Washington , Olympic Peninsula , composite , Bob Perry , layout , Pacific Northwest , Puget Audio , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , maritime , vocational , vocational teaching , wooden , wooden , boatbuilding , woodworking , wooden store , boat store , composite building , strip-planked , Robert Perry , Bruce Blatchley , Instructor Bruce Blatchley , epoxy , fiberglass , foam-main , molds , design jig , jig , construction

    #household furniture #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, wonderful woodworking, wood chairs, wooden performing tools, preferred woodworking, woodworking guides, woodworking workbench programs