TedsWoodworking Plans and Projects

DIY Woodworking Projects

Tag: Marine

  • Little Green Cornish Shrimper 19 on the Teign

    Little Green Cornish Shrimper 19 on the Teign

    Little Green Cornish Shrimper 19 on the Teign

    SPECIFICATION

    LOA: 19.25 ft (5.87 m), 22.5 ft (6.9 m) with the bowsprit
    LWL: 17.58 ft (5.36 m)
    Beam: 7.16 ft (2.18 m)
    Draught1’6” – 4’0”0.457m – 1.219m
    Displacement: 2350lb 1065kg
    Sail spot1: 94ft218.02m2
    Approx towing excess weight: 3300lb1500kg
    RCD class: C

    Shrimper 19 typical sail absent specification

    Hull Construction: Hand laid solid GRP hull with no foam core. Integral centerplate circumstance laminated as section of the total hull framework. Internal bunk and
    forepeak moulding bonded into hull with internal structural bulkheads bonded to both of those hull and deck mouldings. Standard colours are off white, dim blue
    or darkish green. The hull and deck joint is by way of an overlap or ‘Biscuit Tin Lid’ with GRP bonding.
    Rudder: The rudder is transom hung on two stainless metal hangings bolted by way of the transom with Hardwood backing pads. The rudder is built
    from laminated plywood with a stainless steel lifting fall plate.
    Motor Beds: Motor beds are included in the GRP bunk moulding with delicate steel mounts bonded into the mattress design which incorporates an oil drip
    tray.

    Ballast: Ballast is by way of iron punchings encapsulated in resin inside the hull keel moulding. A galvanised metal centerplate types section of the ballast
    with a stainless steel lifting wire main to a winch lifting procedure operated from the cockpit.
    Boot Major: A single boot major moulded in gel coat found above antifouling level. Color in distinction to principal hull and ordinarily matching the deck.
    Deck Construction: Hand laid GRP with Balsa core in way of horizontal load parts. Hard wooden pads beneath deck fittings and strain details.
    Cockpit : Cockpit locker lids are hand laid with Balsa core. There is built-in non slip on horizontal surfaces with an optional two tone colour. A cockpit
    drain is positioned in the middle of the key foot nicely with supplemental drainage from the seats. A central watertight locker features general storage or residences the
    diesel engine when equipped.

    Deck Fittings: Bespoke deck fittings together with bowsprit, tabernacle and chain plates are manufactured from stainless steel. 4 aluminium deck cleats are positioned
    aft & amidships with two fairleads feeding a teak Sampson publish ahead. All sail controls are led aft to rope clutches / jammers with a single halyard
    winch to starboard. Adjustable jib & mainsheet automobiles. Access below is through a teak lined sliding companionway hatch and split plywood / Perspex washboards.
    Additional air flow supplied by an aluminium ahead hatch.
    Ports: 2 aluminium preset ports are equipped 1 each individual in the hull topsides.
    Chain plates: Chain plates are in stainless metal and through bolted on the hull sides.
    Vents: Air flow is by way of a washboard vent and opening forward hatch.
    Miscellaneous Equipment: Gasoline filler &tank vent.(Inboard model only), Daily life harness attachment point by the companionway, Rope tidies for halyards.

    Cockpit Lockers: Two principal watertight lockers with latches and padlocks are offered. A padlock is also provided for the companionway hatch.
    Mainmast: Laminated in Sitka Spruce and addressed with Sikkens Cetol which include a stainless metal mast band to choose Cap shrouds, jib and mainsail halyards.
    All deck mounted on a substantial stainless metal tabernacle.
    Major Growth: Laminated in Sitka Spruce and handled with Sikkens Cetol which include a Stainless metal gooseneck fitting, kicker and mainsheet bands and all
    involved reefing line qualified prospects / terminals.
    Bowsprit: Laminated in Sitka Spruce and dealt with with Sikkens Cetol which includes a Stainless steel pivot fitting, finish plate and bobstay choose off points.
    Gaff: Laminated in Sitka Spruce and handled with Sikkens Cetol like a Stainless metal gaff collar with rubber safety on bearing area. Wire hoist
    span and block.

    Standing Rigging: Cap shrouds, decreased shrouds & forestay in 4mm 1 x 19 stainless steel wire with swagged finishes. Chromed rigging screws. Jib mounted on
    reefing spar and controls led aft to cockpit.
    Running Rigging: Most important throat / peak halyards – 6mm braid. Jib &Staysail halyards – 6mm braid. Key topping carry – 6mm braid. Mainsail reefing traces –
    6mm braid. Mainsail outhaul – 6mm braid. Mainsheet & Jib sheets – 10mm sheet rope. All linked blocks for invest in tackles.
    Mainsail: Dacron in tan or product. 2 reef points with tie in lacing. Luff and gaff lacing as demanded.
    Jib: Dacron in tan or product with wire luff and notify tails.
    Growth Deal with: In maroon, or product acrylic. Fixings to permit for topping carry and mainsheet choose off. All sails supplied with, sail figures, emblem and ties.

    Engineering

    Outboard Model
    Outboard effectively: A teak motor mounting with stainless brackets. Engine effectively hull blank. GRP moulded gasoline tank stowage and gasoline guide splitter through aft
    locker compartment. (gas direct not provided as regular)
    Inboard Version
    Stern Gear: A 1” stainless steel shaft is equipped, linked to the engine by means of a coupling and equipped with a Tides Maritime ‘lip seal’ gland. The shaft drives a fastened
    2-bladed propeller.
    Motor: Yanmar 1GM10 9hp maritime diesel motor. A 55 amp (12V) alternator is fitted to the motor.
    Motor Devices and Controls: The motor instruments are positioned at the rear of the cockpit coaming and are recessed with a apparent cover. Instruments
    consist of audible alarm, alternator warning light, get started switch and quit manage. A single lever motor handle is equipped and equipped in the cockpit nicely.
    Motor Cooling: The motor is right salt water cooled. A 1/2″ diameter pipe prospects from the most important seawater inlet by way of a strainer to the engine and
    discharges overboard as a result of the exhaust.
    Motor Exhaust: A adaptable exhaust hose connects the exhaust through a swan neck with h2o lure to the outlet fitting via the transom.
    Gas Program: A plastic diesel tank with a capacity of around 18 litres, breather and integrated gas gauge. The tank is fitted with flow and return
    lines, the stream line possessing a handbook shut off valve.
    Plumbing
    Bilge System: 1 x Manual bilge pump operated from the cockpit with a manage saved in the aft locker.
    Fresh new Drinking water Tanks: 2 x 10ltr plastic jerry cans with manual hand pump. Also a bucket / sink.
    Soil Method: When fitted the heads discharge straight to sea by means of a vent loop and pores and skin fitting.
    Inlet / Outlet Fittings: Motor: In as a result of a solitary pores and skin fitting with a valve and strainer, out by way of the exhaust system.
    Fuel Technique: There is a double burner hob cooker attached to a separately stored gas bottle.
    12 volt DC process
    Batteries: Engine – a single 12 volt 55 amp/hour. (Optional on outboard version)
    Charging: By way of most important engine – a 35 amp (at 12 volt) alternator.
    Switchboard: An optional swap panel is fitted to boats that have supplemental electronics equipped.
    Miscellaneous Common Products
    Deck: 1 x winch deal with. 1 x bilge pump tackle. Stowed in aft cockpit locker. 1 x fire extinguisher – located down under.
    Joinery: The inside joinery is created from significant quality resources and in accordance with excellent yacht observe. Bulkheads and facet back again linings are
    from plywood.
    Complete: All cabin woodwork is completed in a blend of painted bulkheads and varnished trim.
    Soles: Rubber textured sole through.
    Upholstery: A alternative of gentle or wipe down plastic upholstery is accessible.

    Posted by The Shaldives on 2020-08-29 18:00:04

    Tagged: , Guy Fogwill , Man , Fogwill , United Kingdom , Boats , Devon , bateau , Shaldon , River Teign , August , Teignmouth , Boat , GBR , England , Terrific Britan , River , Yacht , back again beach , Harbour , bateaux , Teign Estuary , Summer time , Yachts , South West , United kingdom , sailing dingy , TQ14 , Teignbridge , sail , Teignmouth (Strategies) , Coastline , Nautical , flicker , Involved British Ports , sony , DSC-HX60 , Vessel , Coastal , Maritime , Maritime , Port , Fatyak , 2020 , août , agosto , augusti , Cornish Shrimper 19 , cornish

    #furniture #Diy #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, fantastic woodworking, picket chairs, wood working equipment, preferred woodworking, woodworking textbooks, woodworking workbench plans

  • Little Green Cornish Shrimper 19 on the Teign

    Little Green Cornish Shrimper 19 on the Teign

    Little Green Cornish Shrimper 19 on the Teign

    SPECIFICATION

    LOA: 19.25 ft (5.87 m), 22.5 ft (6.9 m) with the bowsprit
    LWL: 17.58 ft (5.36 m)
    Beam: 7.16 ft (2.18 m)
    Draught1’6” – 4’0”0.457m – 1.219m
    Displacement: 2350lb 1065kg
    Sail region1: 94ft218.02m2
    Approx towing body weight: 3300lb1500kg
    RCD classification: C

    Shrimper 19 regular sail absent specification

    Hull Development: Hand laid stable GRP hull with no foam core. Integral centerplate scenario laminated as element of the total hull framework. Inner bunk and
    forepeak moulding bonded into hull with internal structural bulkheads bonded to both of those hull and deck mouldings. Conventional colors are off white, dark blue
    or dim eco-friendly. The hull and deck joint is by way of an overlap or ‘Biscuit Tin Lid’ with GRP bonding.
    Rudder: The rudder is transom hung on two stainless metal hangings bolted by way of the transom with Hardwood backing pads. The rudder is manufactured
    from laminated plywood with a stainless metal lifting drop plate.
    Motor Beds: Motor beds are incorporated in the GRP bunk moulding with delicate metal mounts bonded into the bed style which incorporates an oil drip
    tray.

    Ballast: Ballast is by way of iron punchings encapsulated in resin inside of the hull keel moulding. A galvanised steel centerplate types portion of the ballast
    with a stainless steel lifting wire leading to a winch lifting system operated from the cockpit.
    Boot Best: A one boot leading moulded in gel coat situated previously mentioned antifouling amount. Colour in distinction to main hull and generally matching the deck.
    Deck Building: Hand laid GRP with Balsa main in way of horizontal load parts. Tricky wooden pads beneath deck fittings and anxiety factors.
    Cockpit : Cockpit locker lids are hand laid with Balsa core. There is integrated non slip on horizontal surfaces with an optional two tone color. A cockpit
    drain is found in the middle of the principal foot effectively with further drainage from the seats. A central watertight locker presents standard storage or houses the
    diesel motor when fitted.

    Deck Fittings: Bespoke deck fittings like bowsprit, tabernacle and chain plates are designed from stainless metal. 4 aluminium deck cleats are positioned
    aft & amidships with two fairleads feeding a teak Sampson post forward. All sail controls are led aft to rope clutches / jammers with a solitary halyard
    winch to starboard. Adjustable jib & mainsheet automobiles. Accessibility beneath is by using a teak lined sliding companionway hatch and break up plywood / Perspex washboards.
    More ventilation furnished by an aluminium forward hatch.
    Ports: 2 aluminium mounted ports are equipped a person each in the hull topsides.
    Chain plates: Chain plates are in stainless metal and by means of bolted on the hull sides.
    Vents: Ventilation is via a washboard vent and opening ahead hatch.
    Miscellaneous Equipment: Gasoline filler &tank vent.(Inboard version only), Lifestyle harness attachment stage by the companionway, Rope tidies for halyards.

    Cockpit Lockers: Two most important watertight lockers with latches and padlocks are offered. A padlock is also furnished for the companionway hatch.
    Mainmast: Laminated in Sitka Spruce and taken care of with Sikkens Cetol including a stainless metal mast band to take Cap shrouds, jib and mainsail halyards.
    All deck mounted on a significant stainless metal tabernacle.
    Key Boom: Laminated in Sitka Spruce and treated with Sikkens Cetol such as a Stainless steel gooseneck fitting, kicker and mainsheet bands and all
    linked reefing line sales opportunities / terminals.
    Bowsprit: Laminated in Sitka Spruce and handled with Sikkens Cetol such as a Stainless metal pivot fitting, conclude plate and bobstay consider off points.
    Gaff: Laminated in Sitka Spruce and addressed with Sikkens Cetol such as a Stainless steel gaff collar with rubber protection on bearing area. Wire hoist
    span and block.

    Standing Rigging: Cap shrouds, decrease shrouds & forestay in 4mm 1 x 19 stainless metal wire with swagged finishes. Chromed rigging screws. Jib mounted on
    reefing spar and controls led aft to cockpit.
    Managing Rigging: Primary throat / peak halyards – 6mm braid. Jib &Staysail halyards – 6mm braid. Main topping raise – 6mm braid. Mainsail reefing lines –
    6mm braid. Mainsail outhaul – 6mm braid. Mainsheet & Jib sheets – 10mm sheet rope. All connected blocks for invest in tackles.
    Mainsail: Dacron in tan or product. 2 reef details with tie in lacing. Luff and gaff lacing as required.
    Jib: Dacron in tan or product with wire luff and explain to tails.
    Increase Protect: In maroon, or product acrylic. Fixings to enable for topping lift and mainsheet consider off. All sails supplied with, sail figures, emblem and ties.

    Engineering

    Outboard Version
    Outboard effectively: A teak engine mounting with stainless brackets. Engine nicely hull blank. GRP moulded gas tank stowage and gas lead splitter through aft
    locker compartment. (fuel lead not supplied as standard)
    Inboard Variation
    Stern Gear: A 1” stainless metal shaft is equipped, linked to the motor by means of a coupling and equipped with a Tides Marine ‘lip seal’ gland. The shaft drives a mounted
    2-bladed propeller.
    Engine: Yanmar 1GM10 9hp maritime diesel engine. A 55 amp (12V) alternator is equipped to the motor.
    Engine Instruments and Controls: The motor devices are situated at the rear of the cockpit coaming and are recessed with a very clear protect. Devices
    consist of audible alarm, alternator warning mild, commence switch and halt management. A solitary lever engine command is equipped and equipped in the cockpit properly.
    Engine Cooling: The engine is instantly salt water cooled. A 1/2″ diameter pipe prospects from the main seawater inlet by way of a strainer to the engine and
    discharges overboard as a result of the exhaust.
    Motor Exhaust: A adaptable exhaust hose connects the exhaust by way of a swan neck with drinking water lure to the outlet fitting as a result of the transom.
    Fuel Process: A plastic diesel tank with a capability of approximately 18 litres, breather and built-in fuel gauge. The tank is fitted with move and return
    strains, the move line obtaining a manual shut off valve.
    Plumbing
    Bilge Process: 1 x Manual bilge pump operated from the cockpit with a tackle stored in the aft locker.
    Refreshing Drinking water Tanks: 2 x 10ltr plastic jerry cans with guide hand pump. Also a bucket / sink.
    Soil System: When equipped the heads discharge right to sea via a vent loop and skin fitting.
    Inlet / Outlet Fittings: Engine: In by a solitary pores and skin fitting with a valve and strainer, out by means of the exhaust method.
    Gas Procedure: There is a double burner hob cooker attached to a individually saved gasoline bottle.
    12 volt DC system
    Batteries: Engine – a person 12 volt 55 amp/hour. (Optional on outboard edition)
    Charging: By way of primary engine – a 35 amp (at 12 volt) alternator.
    Switchboard: An optional swap panel is equipped to boats that have added electronics equipped.
    Miscellaneous Regular Tools
    Deck: 1 x winch take care of. 1 x bilge pump cope with. Stowed in aft cockpit locker. 1 x fire extinguisher – located down below.
    Joinery: The inside joinery is created from higher excellent components and in accordance with very good yacht apply. Bulkheads and facet back again linings are
    from plywood.
    End: All cabin woodwork is completed in a combine of painted bulkheads and varnished trim.
    Soles: Rubber textured sole during.
    Upholstery: A option of tender or wipe down plastic upholstery is readily available.

    Posted by The Shaldives on 2020-08-29 18:00:05

    Tagged: , Man Fogwill , Dude , Fogwill , United Kingdom , Boats , Devon , bateau , Shaldon , River Teign , August , Teignmouth , Boat , GBR , England , Great Britan , River , Yacht , back beach front , Harbour , bateaux , Teign Estuary , Summer season , Yachts , South West , Uk , sailing dingy , TQ14 , Teignbridge , sail , Teignmouth (Ways) , Shoreline , Nautical , flicker , Connected British Ports , sony , DSC-HX60 , Vessel , Coastal , Maritime , Maritime , Port , Fatyak , 2020 , août , agosto , augusti , Cornish Shrimper 19 , cornish

    #home furnishings #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, great woodworking, wood chairs, wooden doing the job applications, popular woodworking, woodworking guides, woodworking workbench programs

  • Port Hadlock WA – Boat School – Powell Expedition 16-foot Whitehall for the BBC – plugging fastener holes

    Port Hadlock WA – Boat School – Powell Expedition 16-foot Whitehall for the BBC – plugging fastener holes

    Port Hadlock WA - Boat School - Powell Expedition 16-foot Whitehall for the BBC - plugging fastener holes

    www.nwboatschool.org

    Wooden plugs, thoroughly glued in spot above the fastening underneath them, challenge from the larch planks of the 16-foot Whitehall remaining developed for the BBC. You can expect to discover the grain in the plug is aligned with the grain in the plank.

    The British Broadcasting Company (BBC) requested the Boat College to construct 3 customarily-built Whitehalls as replicas of the boats used by John Wesley Powell and his team of explorers throughout their very first-at any time descent of the Colorado River in 1869. The BBC will movie a reenactment of the voyage later on in 2013.

    Pupils at the College are creating a person 16-foot Whitehall, the “Scout Boat”, and two 21-foot Whitehalls. Nevertheless Powell introduced 4 Whitehalls on to the river in 1869, a person, the 21-foot “No Identify”, was shed to the river shortly after the descent started.

    The white oak from which the boats are constructed was supplied by Newport Nautical Timbers www.newportnauticaltimbers.com/ . The 16-foot boat will be planked in larch from eastern Washington, which is as shut as it is probable to come to the original white pine planking made use of on that boat.

    Whitehalls are the iconic American pulling boat.

    They emerged in New York Metropolis and, probably, shortly thereafter in Boston in the 1830’s. It is considered the identify derives from Whitehall Avenue in New York Metropolis, however no one is guaranteed. By the mid-19th century, they could be located anyplace there was a sizeable system of water – the East Coastline, the Terrific Lakes, and the Pacific Coast at San Francisco all boasted boatbuilders turning out Whitehalls.

    The boats were being commonly utilised under oars and at times sail as quick harbor ferries and the boat applied to get harbor pilots out to fulfill inbound sailing ships. They have a fantastic standing as quick, easy-rowing vessels that are capable of carrying a terrific offer of weight.

    Nearly all Whitehalls had been carvel-created with white cedar planking on an oak spine with oak frames. (Carvel planking means that the planks butted up versus each individual other, edge to edge, which final results in a easy hull). The finer boats were being highlighted with a brilliant sheer plank (the top rated plank) varnished to capture one’s eye.

    There is shockingly very little identified about the boats applied by the 1869 Powell Expedition, the initial to descend the Grand Canyon of the Colorado River. We do know that the Powell Expedition boats ended up built in Chicago IL to Powell’s specs.

    It truly is known that the EMMA DEAN, or the “Scout Boat” as Powell named it was 16 toes very long and planked in white pine, that the other boats (MAID OF THE CANON, KITTY CLYDE’s SISTER and NO Name) have been 21 feet lengthy and planked in white oak with 2 times the number of frames and doubled stems and stern posts. (NO Title was shed to the river shortly following Powell commenced the descent, while her crew survived).

    There are no full descriptions of the boats themselves, no photographs, and only a number of scattered references built to the boats in the surviving journals and documents of the Expedition.

    The three boats we are creating for the BBC are remaining manufactured to the ideal details accessible, applying the common scantlings provided by John Gardner’s historical work, extent options, our substantial practical experience in developing Whitehalls more than our 32 many years, and the historic info available to us.

    The boats will be accomplished by mid-July, 2013.

    The Northwest College of Picket Boatbuilding is found in Port Hadlock WA and is an accredited, non-financial gain vocational college. You can obtain us on the net at www.nwboatschool.org .

    Our mission is to instruct and protect the good art of picket boatbuilding and classic maritime crafts.

    We develop both equally commissioned and speculative boats for sale whilst instructing college students boatbuilding the techniques they want to get the job done in the marine trades. If you’re intrigued in our setting up a boat for you, make sure you feel cost-free to give us a connect with.

    You can achieve us by means of e-mail at facts@nwboatschool.org or by calling us at 360-385-4948.

    Posted by Northwest Faculty of Picket Boatbuilding on 2013-03-26 03:52:43

    Tagged: , Northwest College of Wooden Boatbuilding , Boat Faculty , NWSWBB , NWSWB , NSWB , NW Boat Faculty , Port Hadlock , WA , Washington , Olympic Peninsula , Pacific Northwest , Puget Seem , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , marine , vocational , vocational education , wood , wooden , boat , boatbuilding , woodworking , wooden shop , boat shop , wherry , carvel , Whitehall , pulling boat , Newport Nautical Timbers , white oak , quercus alba , British Broadcasting Corporation , BBC , John Wesley Powell , 1869 , Colorado River , Maid of the Canon , Kitty Clyde’s Sister , Emma Dean , Powell Expedition

    #home furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wooden planer, wonderful woodworking, wood chairs, wood doing work tools, well-liked woodworking, woodworking publications, woodworking workbench designs

  • Port Hadlock WA – Boat School – Trad Large Craft – Ben Kahn section – Powell Expedition 21-ft Whitehalls for BBC

    Port Hadlock WA – Boat School – Trad Large Craft – Ben Kahn section – Powell Expedition 21-ft Whitehalls for BBC

    Port Hadlock WA - Boat School - Trad Large Craft - Ben Kahn section - Powell Expedition 21-ft Whitehalls for BBC

    The British Broadcasting Company (BBC) is contracting with the College for the design of a few typically-built Whitehalls to be built as replicas of the boats applied by John Wesley Powell and his team in the course of their initial-ever descent of the Colorado River in 1869. The BBC will movie a reenactment of the voyage later in 2013.

    The School is setting up a single 16-foot Whitehall, the “Scout Boat”, and two 21-foot Whitehalls. While Powell introduced four Whitehalls on to the river in 1869, a single was missing in rapids soon soon after the descent commenced.

    Whitehalls are the iconic American pulling boat.

    They emerged in New York City and, potentially, shortly thereafter in Boston in the 1830’s. It is considered the identify derives from Whitehall Street in New York City, while no just one is guaranteed. By the mid-19th century, they could be located everywhere there was a sizeable physique of drinking water – the East Coast, the Wonderful Lakes, and the Pacific Coastline at San Francisco all boasted boatbuilders turning out Whitehalls.

    The boats ended up normally applied beneath oars and sometimes sail as speedy harbor ferries and the boat used to take harbor pilots out to meet up with inbound sailing ships. They have a high-quality name as speedy, effortless-rowing vessels.

    Almost all Whitehalls were being carvel-built with white cedar planking on an oak backbone with oak frames. (Carvel planking implies that the planks butted up from just about every other, edge to edge, which success in a smooth hull). The finer boats had been highlighted with a brilliant sheer plank (the best plank) varnished to capture one’s eye.

    Mystic Seaport has several high-quality sets of ideas out there for typical American Whitehalls. www.mysticseaport.org

    The Northwest University of Wooden Boatbuilding is positioned in Port Hadlock WA and is an accredited, non-gain vocational college. You can uncover us on the world-wide-web at www.nwboatschool.org .
    Our mission is to train and protect the fine art of wood boatbuilding and common maritime crafts.
    We make both commissioned and speculative boats for sale although instructing pupils boatbuilding the expertise they need to have to get the job done in the maritime trades.
    You can reach us via e-mail at facts@nwboatschool.org or by contacting us at 360-385-4948.

    Posted by Northwest University of Wooden Boatbuilding on 2013-02-04 01:43:46

    Tagged: , Northwest School of Wooden Boatbuilding , Boat College , NWSWBB , NWSWB , NSWB , NW Boat Faculty , Port Hadlock , WA , Washington , Olympic Peninsula , Pacific Northwest , Puget Seem , PNW , Port Townsend , Quimper Peninsula , craft , craftsmanship , marine , vocational , vocational instruction , wooden , wood , boat , boatbuilding , woodworking , wooden shop , boat shop , wherry , carvel , Whitehall , pulling boat , British Broadcasting Company , BBC , John Wesley Powell , 1869 , Colorado River , Powell Expedition

    #furniture #Diy #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, good woodworking, picket chairs, wooden doing work resources, well-known woodworking, woodworking textbooks, woodworking workbench plans

  • Cornish Shrimper 19, The Salty Teignmouth

    Cornish Shrimper 19, The Salty Teignmouth

    Cornish Shrimper 19, The Salty Teignmouth

    Sailboat Specs

    Hull Style: Keel/Cbrd.
    Rigging Sort: Gaffhead Sloop
    Length overall: 22’6″ 6.858m
    Length more than deck: 19’3” 5.867m
    Length of waterline: 17’7″ 5.334m
    Beam: 7’2” 2.184m
    Draught:1’6” – 4’0”0.457m – 1.219m
    Displacement:2350lb1065kg
    Ballast: 700 lb / 318 kg
    Sail place:194ft218.02m2
    Approx towing bodyweight:3300lb1500kg
    RCD categoryC
    S.A./Disp.: 17.60
    Bal./Disp.: 29.79
    Disp./Len.: 195.75
    Development: GRP
    Designer: Roger Dongray
    First Developed: 1979
    # Built: 1000

    Builder

    Cornish Crabbers LLP
    Device 5, Bess Park Highway
    Wadebridge
    Cornwall
    PL27 6HB
    Phone: +44 ()1208 862 666
    Electronic mail: details@cornishcrabbers.co.uk

    Auxiliary Ability/Tanks (orig. equip.)
    Make: Yanmar (decide.)
    Product: Yanmar 1GM10 9hp
    Type: Diesel

    Sailboat Calculations

    S.A./Disp.: 17.60
    Bal./Disp.: 29.79
    Disp./Len.: 195.75
    Comfort Ratio: 14.60
    Capsize Screening Components: 2.16

    Shrimper 19 typical sail away specification
    Hull Building: Hand laid reliable GRP hull with no foam core. Integral centerplate situation laminated as element of the full hull construction. Inner bunk and
    forepeak moulding bonded into hull with interior structural bulkheads bonded to each hull and deck mouldings. Normal colours are off white, dim blue
    or dim environmentally friendly. The hull and deck joint is by way of an overlap or ‘Biscuit Tin Lid’ with GRP bonding.
    Rudder: The rudder is transom hung on two stainless steel hangings bolted by means of the transom with Hardwood backing pads. The rudder is built
    from laminated plywood with a stainless steel lifting fall plate.
    Engine Beds: Engine beds are incorporated in the GRP bunk moulding with moderate metal mounts bonded into the mattress style and design which incorporates an oil drip
    tray.
    Ballast: Ballast is by way of iron punchings encapsulated in resin within the hull keel moulding. A galvanised metal centerplate varieties component of the ballast
    with a stainless metal lifting wire major to a winch lifting procedure operated from the cockpit.
    Boot Leading: A single boot top rated moulded in gel coat located previously mentioned antifouling stage. Color in distinction to main hull and usually matching the deck.
    Deck Design: Hand laid GRP with Balsa core in way of horizontal load areas. Challenging wooden pads less than deck fittings and anxiety factors.
    Cockpit : Cockpit locker lids are hand laid with Balsa main. There is integrated non slip on horizontal surfaces with an optional two tone colour. A cockpit
    drain is found in the centre of the most important foot nicely with supplemental drainage from the seats. A central watertight locker gives common storage or properties the
    diesel motor when equipped.
    Deck Fittings: Bespoke deck fittings such as bowsprit, tabernacle and chain plates are built from stainless steel. 4 aluminium deck cleats are positioned
    aft & amidships with two fairleads feeding a teak Sampson submit forward. All sail controls are led aft to rope clutches / jammers with a single halyard
    winch to starboard. Adjustable jib & mainsheet automobiles. Accessibility underneath is by means of a teak lined sliding companionway hatch and split plywood / Perspex washboards.
    Additional ventilation provided by an aluminium ahead hatch.
    Ports: 2 aluminium set ports are equipped 1 every single in the hull topsides.
    Chain plates: Chain plates are in stainless steel and by way of bolted on the hull sides.
    Vents: Ventilation is by means of a washboard vent and opening forward hatch.
    Miscellaneous Equipment: Gasoline filler &tank vent.(Inboard version only), Lifetime harness attachment stage by the companionway, Rope tidies for halyards.
    Cockpit Lockers: Two main watertight lockers with latches and padlocks are provided. A padlock is also delivered for the companionway hatch.
    Mainmast: Laminated in Sitka Spruce and dealt with with Sikkens Cetol which include a stainless metal mast band to consider Cap shrouds, jib and mainsail halyards.
    All deck mounted on a significant stainless steel tabernacle.
    Main Increase: Laminated in Sitka Spruce and taken care of with Sikkens Cetol which include a Stainless steel gooseneck fitting, kicker and mainsheet bands and all
    affiliated reefing line leads / terminals.
    Bowsprit: Laminated in Sitka Spruce and dealt with with Sikkens Cetol which includes a Stainless metal pivot fitting, end plate and bobstay just take off factors.
    Gaff: Laminated in Sitka Spruce and dealt with with Sikkens Cetol including a Stainless steel gaff collar with rubber security on bearing area. Wire hoist
    span and block.
    Standing Rigging: Cap shrouds, lessen shrouds & forestay in 4mm 1 x 19 stainless metal wire with swagged finishes. Chromed rigging screws. Jib mounted on
    reefing spar and controls led aft to cockpit.
    Functioning Rigging: Principal throat / peak halyards – 6mm braid. Jib &Staysail halyards – 6mm braid. Major topping carry – 6mm braid. Mainsail reefing strains –
    6mm braid. Mainsail outhaul – 6mm braid. Mainsheet & Jib sheets – 10mm sheet rope. All related blocks for obtain tackles.
    Mainsail: Dacron in tan or cream. 2 reef details with tie in lacing. Luff and gaff lacing as needed.
    Jib: Dacron in tan or cream with wire luff and convey to tails.
    Increase Address: In maroon, or cream acrylic. Fixings to allow for for topping raise and mainsheet get off. All sails equipped with, sail quantities, symbol and ties.
    Engineering
    Outboard Version
    Outboard nicely: A teak motor mounting with stainless brackets. Motor very well hull blank. GRP moulded fuel tank stowage and gasoline direct splitter via aft
    locker compartment. (fuel direct not provided as normal)
    Inboard Variation
    Stern Gear: A 1” stainless steel shaft is equipped, connected to the engine by using a coupling and equipped with a Tides Marine ‘lip seal’ gland. The shaft drives a mounted
    2-bladed propeller.
    Engine: Yanmar 1GM10 9hp marine diesel engine. A 55 amp (12V) alternator is fitted to the motor.
    Engine Devices and Controls: The engine instruments are positioned at the rear of the cockpit coaming and are recessed with a obvious go over. Instruments
    consist of audible alarm, alternator warning light-weight, begin swap and cease command. A single lever engine handle is supplied and fitted in the cockpit nicely.
    Motor Cooling: The engine is right salt h2o cooled. A 1/2″ diameter pipe sales opportunities from the main seawater inlet by means of a strainer to the motor and
    discharges overboard by means of the exhaust.
    Engine Exhaust: A flexible exhaust hose connects the exhaust through a swan neck with h2o lure to the outlet fitting via the transom.
    Gasoline Program: A plastic diesel tank with a capability of about 18 litres, breather and integrated gas gauge. The tank is fitted with stream and return
    traces, the move line possessing a handbook shut off valve.
    Plumbing
    Bilge Program: 1 x Manual bilge pump operated from the cockpit with a deal with saved in the aft locker.
    Contemporary Water Tanks: 2 x 10ltr plastic jerry cans with handbook hand pump. Also a bucket / sink.
    Soil System: When equipped the heads discharge directly to sea by means of a vent loop and skin fitting.
    Inlet / Outlet Fittings: Engine: In by means of a one pores and skin fitting with a valve and strainer, out through the exhaust process.
    Gasoline Process: There is a double burner hob cooker attached to a individually saved gasoline bottle.
    12 volt DC technique
    Batteries: Motor – a person 12 volt 55 amp/hour. (Optional on outboard model)
    Charging: Through major motor – a 35 amp (at 12 volt) alternator.
    Switchboard: An optional change panel is fitted to boats that have supplemental electronics fitted.
    Miscellaneous Typical Equipment
    Deck: 1 x winch deal with. 1 x bilge pump tackle. Stowed in aft cockpit locker. 1 x fire extinguisher – positioned down beneath.
    Joinery: The inside joinery is manufactured from substantial top quality materials and in accordance with great yacht follow. Bulkheads and side back again linings are
    from plywood.
    Finish: All cabin woodwork is finished in a combine of painted bulkheads and varnished trim.
    Soles: Rubber textured sole all over.
    Upholstery: A choice of soft or wipe down plastic upholstery is available.

    Posted by The Shaldives on 2022-05-08 16:47:07

    Tagged: , Guy Fogwill , Person , Fogwill , United Kingdom , Boats , Devon , bateau , Shaldon , River Teign , Teignmouth , Boat , GBR , April , England , Excellent Britan , River , Newton Abbot , Harbour , bateaux , GBTNM , Teign Estuary , Europe , South West , British isles , the shaldives , TQ14 , Teignbridge , Teignmouth (Techniques) , Coastline , GB , Nautical , flicker , Affiliated British Ports , sony , DSC-HX60 , Vessel , Coastal , Marine , Maritime , south of england , Port , Bâteaux , Cornish Shrimper 19 , South Devon , 2022 , Cornish Shrimper

    #furnishings #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wooden planer, fantastic woodworking, wooden chairs, wood performing tools, well known woodworking, woodworking guides, woodworking workbench ideas