TedsWoodworking Plans and Projects

Tag: Industrial Archaeology

  • L2020_5248 – Minera Lead Mines

    L2020_5248 – Minera Lead Mines

    L2020_5248 - Minera Lead Mines

    Meadow Shaft – Look at to Meadow (Town) Shaft Engien Property throughout the mineral processing ground. Considerable conservation and restoration do the job took location in the 1990s but the web site now seems in need of urgent care and consideration after once again.

    For a lot of more photos of the Minera Mines and links to connected internet sites you should click on below: www.jhluxton.com/Industrial-Archaeology/Mines-and-Collier…

    Mining very first took put at Minera all through the Center Ages only ending all-around the time of the Black Demise in 1349.

    Work recommenced on the internet site in 1527 but drainage of the workings proved problematical and the mines closed yet again.

    In 1845 the well identified British mining issue of John Taylor and Sons shaped the Minera Mining Organization who mounted pumping engines and enhanced drainage.

    John Taylor & Sons experienced employed a £30,000 financial investment at the time, yet the profits for 1864 on your own were being £60,000 (equivalent to over £4 Million in 2008. By 1900, the value of direct and zinc had fallen considerably, even though the price of coal used for the mine’s steam engines rose.
    Pumping stopped in 1909 with equipment becoming marketed off by 1914.

    Minera Mines experienced their possess railway which connected to the Wrexham and Minera line of the Terrific Western Railway at Minera Limeworks this mineral railway was in some cases referred to as the New Brighton Department using its identify from the mining village shut to the mine was.

    The workings and area area underwent significant restoration and regeneration funded by Wrexham County Borough Council and the Welsh Advancement Agency commencing in 1988 to make guaranteed the lead, Zinc and lime spoil ideas didn’t contaminate neighborhood h2o provides, the Engine dwelling was rebuilt and equipped with replica machinery and the ore dressing floor about Meadow Shaft was conserved with reconstructed least, waterwheel and buddle with a modest museum produced on website.

    However in modern years tiny upkeep appears to have been carried out and some of the new woodwork put in in the 1990s is deteriorating swiftly. Repairs are essential urgently.

    Posted by www.jhluxton.com – John H. Luxton Images on 2020-12-30 17:22:08

    Tagged: , 2020 , Clwyd , Cymru , Denbighshire , Industrial Archaeology , Industrial Heritage , Industrial History , John H. Luxton Pictures , Leica , Leica M , Leica M-E 240 , Leica M-E typ 240 , MWYNGLAWDD PLWM , Minera , Minera Direct Mines , Mining Heritage , Mwynglawdd , Parc Gwledig a Phyllau Plwm Y Mwynglawdd , Sir Ddinbych , Wales , Wrecsam , Wrexham County Borough , mine , mining , mining museum , www.jhluxton.com , Wrexham , United Kingdom , monochrome , B&W , blackandwhite

    #home furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, fantastic woodworking, picket chairs, wood operating instruments, well-liked woodworking, woodworking textbooks, woodworking workbench programs

  • Industrial Bandsaw by Jackson-Cochrane in Kitchener, Ontario.

    Jackson-Cochrane industrial bandsaw, Kitchener, Ontario.

    The Jackson-Cochrane saw is a relic of the industrial past of Waterloo region in Ontario, Canada. This particular saw is believed to date back to the early twentieth century and can be found in Francis Green, a small park in downtown Kitchener. Standing tall and proud, the saw is a testament to the manufacturing excellence of Jackson-Cochrane, a local company that produced high-quality industrial woodworking machinery.

    What makes the saw even more intriguing is its location. It stands in front of the former Lang Tannery, which has been transformed into a high-tech hub called The Hub. The contrast between the saw and the modern technology centre behind it is a fascinating indication of the dramatic changes that have occurred in Waterloo region over the past century.

    The Jackson-Cochrane saw is one of the many artifacts that are being celebrated as part of the Kitchener Industrial Artifacts Project. This project seeks to honour the industrial heritage of the region by showcasing relics from its manufacturing past. By bringing these artifacts to the forefront, the project aims to foster a greater appreciation for the region’s history and help preserve its legacy for future generations.

    The Jackson-Cochrane saw is a prime example of the type of machinery that was once commonplace in the region. In its heyday, Jackson-Cochrane was a major player in the local manufacturing scene, producing a wide range of woodworking machinery that was used in factories throughout the area. Despite the company’s success, however, it was unable to withstand the changes that occurred in the industry over the years and eventually closed its doors.

    Despite the company’s decline, relics like the Jackson-Cochrane saw continue to inspire admiration and respect. This particular saw is a true work of art, with its massive blade and elegant design. It’s easy to imagine the saw in action, cutting through thick slabs of wood with ease, a testament to the skill and expertise of the men and women who built it.

    The Kitchener Industrial Artifacts Project is more than just a celebration of the past, however. It’s also a recognition of the importance of manufacturing in the region today. Waterloo region has long been known as a hub of innovation, a place where entrepreneurs and inventors thrive. By celebrating the industrial heritage of the region, the project seeks to inspire a new generation of entrepreneurs and innovators and help ensure that the region’s manufacturing legacy continues for many years to come.

    The project has already achieved remarkable success, inspiring interest and enthusiasm across the region. Visitors to Francis Green can’t help but stop and marvel at the Jackson-Cochrane saw, and as word of the project spreads, more and more people are expressing their support and admiration.

    The Kitchener Industrial Artifacts Project is a fitting tribute to the region’s manufacturing past, but it’s also a call to action. By showcasing the incredible work of companies like Jackson-Cochrane, the project serves as a reminder of what the region is capable of achieving. It’s a reminder of the innovation, creativity, and hard work that have made Waterloo region one of the most vibrant and exciting places in Canada.

    As the project moves forward, it’s likely that more relics of the region’s industrial past will come to light. Each artifact will be a testament to the ingenuity and resourcefulness of the region’s manufacturing pioneers, and each will provide an opportunity to celebrate and honour the legacy of Waterloo’s rich industrial heritage.

    Posted by nickr1 on 2015-12-20 15:13:52

  • L2020_5274-2 – MInera Lead Mines – Meadow Shaft

    L2020_5274-2 – MInera Lead Mines – Meadow Shaft

    L2020_5274-2 - MInera Lead Mines - Meadow Shaft

    Meadow (aka City) Shaft head body. This was a duplicate centered on the initial design and style installed in the course of conservation of the website in the early 1990s. Regretably a deficiency of new maintenance is ensuing in its constant decay.

    For lots of far more images of the Minera Mines and links to related sites remember to click here: www.jhluxton.com/Industrial-Archaeology/Mines-and-Collier…

    Mining initially took location at Minera in the course of the Middle Ages only ending about the time of the Black Death in 1349.

    Perform recommenced on the web site in 1527 but drainage of the workings proved problematical and the mines shut again.

    In 1845 the properly recognized British mining issue of John Taylor and Sons formed the Minera Mining Business who put in pumping engines and improved drainage.

    John Taylor & Sons had utilised a £30,000 investment decision at the time, nonetheless the gains for 1864 alone were £60,000 (equivalent to about £4 Million in 2008. By 1900, the rate of direct and zinc had fallen considerably, whilst the selling price of coal applied for the mine’s steam engines rose.
    Pumping stopped in 1909 with gear becoming marketed off by 1914.

    Minera Mines had their have railway which linked to the Wrexham and Minera line of the Fantastic Western Railway at Minera Limeworks this mineral railway was sometimes referred to as the New Brighton Branch having its title from the mining village near to the mine was.

    The workings and nearby place underwent massive restoration and regeneration funded by Wrexham County Borough Council and the Welsh Improvement Agency beginning in 1988 to make positive the lead, Zinc and lime spoil suggestions didn’t contaminate area water materials, the Motor house was rebuilt and fitted with replica machinery and the ore dressing ground around Meadow Shaft was conserved with reconstructed the very least, waterwheel and buddle with a smaller museum made on web-site.

    Regretably in recent several years small servicing seems to have been finished and some of the new woodwork installed in the 1990s is deteriorating promptly. Repairs are desired urgently.

    Posted by www.jhluxton.com – John H. Luxton Photography on 2020-12-31 13:44:41

    Tagged: , 2020 , Clwyd , Cymru , Denbighshire , Industrial Archaeology , Industrial Heritage , Industrial Record , John H. Luxton Images , Leica , Leica M , Leica M-E 240 , Leica M-E typ 240 , MWYNGLAWDD PLWM , Minera , Minera Lead Mines , Mining Heritage , Mwynglawdd , Parc Gwledig a Phyllau Plwm Y Mwynglawdd , Sir Ddinbych , Wales , Wrecsam , Wrexham County Borough , mine , mining , mining museum , www.jhluxton.com , Wrexham , United Kingdom , monochrome , b&w , black

    #furnishings #Diy #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, fine woodworking, wood chairs, wood functioning applications, popular woodworking, woodworking guides, woodworking workbench programs

  • L2014_2444 – Through a Crack – Interior of Old Lizard Lifeboat Station

    L2014_2444 – Through a Crack – Interior of Old Lizard Lifeboat Station

    L2014_2444 - Through a Crack - Interior of Old Lizard Lifeboat Station

    The little lens of a Leica X1 could just peek as a result of a smaller crack in the woodwork of the door of the 1914 developed lifeboat station at Polpeor Cove to produce this unusual view of the inside taken by readily available gentle. The vigneting is established by the crack.

    It plainly exhibits the fishing gear which was currently being stored there by community fishermen. The lifeboat station closed in 1961 when the Lizard Lifeboat was transferred to Kilcobben Cove.

    For additional images and information on the Polpeor Cove Lifeboat Station be sure to click on here: www.jhluxton.com/Shipping and delivery/RNLI-Lifeboats-Stations/RNLI-Li…

    Posted by www.jhluxton.com – John H. Luxton Images on 2021-08-19 18:03:04

    Tagged: , POLPEOR , POLPEOR COVE , POLPEOR COVE LIFEBOAT STATION , LIFEBOAT , ROYAL Nationwide LIFEBOAT Establishment , LIFEBOAT STATION , RNLI LIFEBOAT STATION , LIZARD LIFEBOAT STATION , DISUSED , DISUSED LIFEBOAT STATION , KERNOW , CORNWALL , ENGLAND , United kingdom , WWW.JHLUXTON.COM , JOHN H. LUXTON Images , THE LIZARD , LIZARD , LIZARD Issue , 2014 , LEICA , MARITIME HERITAGE , INDUSTRIAL ARCHAEOLOGY , INDUSTRIAL History , INDUSTRIAL HERITAGE , ENGLISH CHANNEL , CORNISH Coast , LEICA X1

    #furnishings #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wooden planer, wonderful woodworking, wood chairs, wooden working equipment, preferred woodworking, woodworking guides, woodworking workbench ideas

  • Machine and Woodworking Shop

    Machine and Woodworking Shop

    Machine and Woodworking Shop

    Baltimore & Ohio Martinsburg Retailers. Device and Woodworking Store. Constructed in 1866. It was the Bridge and Machine Store when CSX closed the plant in 1985.

    Countrywide Sign-up of Historic Destinations 03001045

    WV031

    Posted by Andy961 on 2013-02-13 03:58:55

    Tagged: , Martinsburg , West Virginia , WV , railway , railroad , practice , B&O , roundhouse , get rid of , shops , property , brick , industrial structures , industrial archaeology , NRHP

    #household furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, fine woodworking, picket chairs, wooden doing the job instruments, preferred woodworking, woodworking textbooks, woodworking workbench designs