TedsWoodworking Plans and Projects

DIY Woodworking Projects

Tag: boxwood

  • “Boxwood Container”

    BoxwoodBox

    In this content, the author talks about their small scrap boxwood project, which they made using real dovetails for the first time. The box is described as being very small.

    The use of real dovetails in woodworking is a skill that is often sought after, as it adds an element of traditional craftsmanship to the finished piece. The author explains that this was their first experience with this technique, which involves cutting interlocking tails and pins by hand to create a strong joint between two pieces of wood. While it can be challenging to get the angles and cuts just right, the end result is usually a visually stunning and structurally sound piece of woodwork.

    The project itself is a small box made from scrap wood, which the author explains is a great way to practice new skills without investing a lot of time or resources into a larger project. Using scrap wood also allows for a degree of experimentation and creativity, as the wood may have unique characteristics or grain patterns that can be incorporated into the design.

    The size of the box is emphasized throughout the content, with the author noting that it is indeed very small. While this may seem like a trivial detail, it does add a level of challenge to the project, as small pieces of wood can be more difficult to work with and require precise measurements and cuts. Despite the size, the author was able to create a functional and attractive box using their newfound dovetail technique.

    Overall, this content highlights the value of practicing new woodworking skills on small projects, and the satisfaction that comes from using traditional techniques such as real dovetails. While the project itself was simple, the skill-building and creative potential of working with scrap wood and traditional techniques make it a valuable and rewarding endeavor for any woodworking enthusiast.

    Posted by Beau Williamson on 2021-12-06 00:30:33

  • “Crown dovetailed Skewed Mitre Plane Crafted by Hand”

    Hand made skewed mitre plane with crown dovetails

    This content describes the construction and features of a large mitre plane made of brass and steel. The plane has a skew mouth and an adjustable toe section that allows the mouth to be adjusted. The brass bridge pivots on a pin and the front handle or tote is removable to access the nut that tightens the mouth piece. The wood used in the construction of the plane is boxwood and the entire construction is traditional fabricated and dovetailed.

    A mitre plane is a hand tool used to shape and smooth the edges of woodworking projects, especially mitre joints. The plane works by removing thin shavings of wood as it is pushed along the surface of the workpiece. A heel at the rear of the plane keeps the blade at an angle to the workpiece, while a skew mouth allows the blade to cut at an angle to the direction of travel. The adjustable toe section of this particular mitre plane allows for even more precise control over the cut.

    The mitre plane is made primarily of brass and steel, with a wooden handle or tote. Brass is a good choice for the bridge and other parts of the plane because it is highly resistant to corrosion and has a low coefficient of friction, meaning that it allows the blade to move smoothly over its surface. Steel is used for the blade and the other parts of the plane because it is hard enough to hold a sharp edge and tough enough to withstand the stresses of use.

    The skew mouth of the mitre plane is created by cutting a bevel into one side of the mouth so that the blade is angled slightly to one side. This creates a shear angle that helps to slice through the wood fibers more cleanly and reduces tear-out. The adjustable toe section allows the position of the mouth to be changed, giving the user even more control over the cut. The brass bridge that carries the blade pivots on a pin so that it can be moved up and down to adjust the depth of cut.

    The front handle or tote of the plane is removable to allow access to the nut that tightens the mouth piece. This nut can be adjusted to change the width of the mouth, which can affect the quality of the cut. The handle is made of boxwood, a hard, dense wood that is resistant to wear and can be polished to a high shine.

    The construction of the mitre plane is traditional fabricated and dovetailed. Fabricated construction means that the plane was made by cutting and shaping the individual parts and then assembling them into the final shape. Dovetailing is a traditional method of joining two pieces of wood at a right angle by cutting interlocking “tails” and “pins” into the ends of the boards. This creates a strong joint that resists twisting and warping.

    In conclusion, this content provides a detailed description of the construction and features of a large mitre plane made of brass, steel, and boxwood. The plane is designed to shape and smooth the edges of woodworking projects with precision and control. Its skew mouth and adjustable toe section make it a versatile tool that can handle a variety of cutting tasks. The traditional fabricated and dovetailed construction ensures that the plane is strong, durable, and able to withstand the rigors of use.

    Posted by Justin Barrie Kelly on 2011-02-26 22:27:02