TedsWoodworking Plans and Projects

Tag: Abraham Darby III

  • Cast-iron landmark

    Cast-iron landmark

    Cast-iron landmark

    The Iron Bridge in the village of Ironbridge near Telford, Shropshire

    Some background information:

    Opened in 1781, the Iron Bridge, which crosses the River Severn in Shropshire, was the very first arch bridge in the entire world to be produced of forged iron. This substance was formerly much too costly to use for huge structures. On the other hand, a new blast furnace close by lowered the cost and inspired neighborhood engineers and architects to clear up a extended-standing issue of a crossing more than the river.

    The bridge, the adjacent settlement of Ironbridge and the Ironbridge Gorge sort the UNESCO “Ironbridge Gorge” Earth Heritage Web-site. The bridge is also a Quality I stated building.

    In the early eighteenth century, the only way to cross the Severn Gorge was by ferry. Yet, the industries that were being expanding in the location of Coalbrookdale and Broseley essential a more reputable crossing.

    In 1773, the English architect Thomas Farnolls Pritchard wrote to a area ironmaster, John Wilkinson of Broseley, to recommend setting up a bridge out of forged iron. By 1775, Pritchard experienced finalised the strategies, but he died in December 1777, only a month right after operate had begun. Abraham Darby III, who was the grandson of the very first foundry owner and an ironmaster functioning at Coalbrookdale in the gorge, was commissioned to cast and make the bridge. The iron for the new bridge was solid at his foundry.

    Shares have been issued to elevate the 3,200 £ necessary, and Darby agreed to fund any extra. Despite the fact that it had been predicted that 300 tons of iron would be needed (costing 7 £ a ton), in the finish 379 tons have been used, costing Darby and his enterprise just about 3,000 £. There would be many other prices to bear (masonry abutments, assembly, etcetera.), so that the venture was significantly additional high-priced than initial envisaged. Darby bore most of the price tag overrun, and was in financial debt for the rest of his lifestyle.

    Currently being the 1st of its kind, the design had no precedent. The strategy chosen to produce the framework was hence based mostly on carpentry. Every single member of the frame was forged independently, and fastenings adopted individuals applied in woodworking, such as the mortise and tenon and blind dovetail joints, adapted as necessary to the diverse qualities of forged iron. Bolts have been used to fasten the 50 %-ribs with each other at the crown of the arch. Incredibly huge elements have been wanted to create a construction to span 100 toes growing to 60 toes over the river. The biggest sections ended up the fifty percent-ribs, each individual about 70 ft extended and weighing 5.25 tons. The bridge contains extra than 800 castings of twelve basic types.

    In the summer months of 1779 the Iron Bridge was raised, and on New Year’s Day 1781 it was opened.

    But just a couple of a long time immediately after the building of the bridge, cracks appeared in the masonry abutments, partly prompted by ground motion. Some of the current-working day cracks in the forged iron could date from this time, whilst other people are almost certainly casting cracks from flaws these kinds of as blow holes. Some cracks were pinned with wrought iron straps, but other people nevertheless seen in the bridge currently have been left untouched. Other architects realized from that and subsequent bridges, this kind of as all those developed by Thomas Telford, applied a lot fewer cast iron, even while they ended up struggling comparable issues of abutment movement.

    Presently the Iron Bridge is a wonderful icon of the beginning Industrial Revolution. Collectively with the 10 Ironbridge Gorge Museums nearby it is frequented by about 550,000 readers each yr. For this reason the tourist market has turn into a big resource of cash flow in today’s Ironbridge and Coalbrookdale.

    Posted by Silanov on 2013-08-14 05:03:28

    Tagged: , EU , Europe , England , British isles , Fantastic Britain , United Kingdom , Großbritannien , English , Englisch , British , Britisch , Shropshire , Ironbridge , Coalbrookdale , Broseley , The Gorge , Telford , Telford and Wrekin , Ironbridge Gorge , Eisenbrücke , bridge , Brücke , iron , Eisen , forged iron , Gusseisen , Schmiedeeisen , gusseisern , schmiedeeisern , river , Fluss , Severn , River Severn , Severn Gorge , valley , Tal , gorge , Schlucht , Industrial Revolution , Industrielle Revolution , Thomas Farnolls Pritchard , Abraham Darby III , Quality I mentioned building , UNESCO , UNESCO World Heritage , UNESCO Entire world Heritage Internet site , UNESCO Planet Heritage Internet sites , UNESCO Welterbe , UNESCO Weltkulturerbe , monument , Denkmal , industrial monument , Industriedenkmal , 18th century , eighteenth century , the 1700s , 18. Jahrhundert , sight , Sehenswürdigkeit , icon , Image , landmark , Wahrzeichen , perspective , Ausblick , Aussicht , Frühling , Frühjahr , 2013

    #household furniture #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, good woodworking, wood chairs, wood working equipment, preferred woodworking, woodworking publications, woodworking workbench ideas

  • Ironbridge in Shropshire: The Bridge of Iron

    The Iron Bridge, Ironbridge, Shropshire

    In the early eighteenth century, the Severn Gorge’s growing industries in Coalbrookdale and Broseley needed a more reliable crossing. The only way to cross the gorge was by ferry, so Abraham Darby III was commissioned to build a bridge. The iron for the new bridge was cast at his foundry, and shares were issued to raise the required funds of £3,200, Darby agreed to fund any excess. The construction had no precedent, and so, the method chosen to create the structure was based on carpentry, where each member of the frame was cast separately using different properties of cast iron. The finished structure needed to span 100 feet rising to 60 feet above the river, with the largest parts being the half-ribs, each about 70 ft long and weighing 5.25 tons. More than 800 castings of 12 basic types were used in the construction of the bridge. The cost of the project was far more expensive than first envisaged, with Darby bearing most of the cost overrun, and was in debt for the rest of his life. The bridge was raised in the summer of 1779 and opened on New Year’s Day 1781.

    Posted by maisonburke on 2012-11-28 10:23:49

  • The Iron Bridge, Ironbridge, Shropshire

    The Iron Bridge, Ironbridge, Shropshire

    The Iron Bridge, Ironbridge, Shropshire

    In the early eighteenth century, the only way to cross the Severn Gorge was by ferry . However, the industries that have been developing in the region of Coalbrookdale and Broseley needed a much more trustworthy crossing.

    Abraham Darby III, grandson of the very first foundry operator and an ironmaster doing the job at Coalbrookdale in the gorge, was commissioned to cast and construct the bridge. The iron for the new bridge was forged at his foundry.

    Shares were issued to increase the £3,200 essential, and Darby agreed to fund any extra. Whilst it experienced been predicted that 300 tons of iron would be necessary (costing £7 a ton), in the conclude 379 tons were being utilized, costing Darby and his corporation practically £3,000. There would be numerous other expenditures to bear (masonry abutments, assembly, and many others.), so that the venture was much far more highly-priced than initial envisaged. Darby bore most of the charge overrun, and was in debt for the rest of his lifestyle.

    Becoming the 1st of its type, the construction experienced no precedent the technique chosen to generate the structure was consequently centered on carpentry. Every single member of the frame was solid separately, and fastenings followed these utilized in woodworking, such as the mortise and tenon and blind dovetail joints, adapted as needed to the different attributes of cast iron. Bolts have been applied to fasten the fifty percent-ribs jointly at the crown of the arch. Quite massive parts were required to generate a structure to span 100 feet soaring to 60 feet above the river. The major elements have been the 50 %-ribs, each about 70 ft extended and weighing 5.25 tons. The bridge includes far more than 800 castings of 12 fundamental sorts.

    The bridge was raised in the summertime of 1779, and it was opened on New Year’s Day 1781.

    Posted by maisonburke on 2012-11-28 10:24:03

    Tagged: , 5PhotosaDay , Shropshire , Salop , Ironbridge , GoldStarAward , Bridges , Rivers , Reflections , RefleXions , Reflected , River Severn , Abraham Darby III

    #home furnishings #Do it yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, wonderful woodworking, wooden chairs, wood working instruments, well-liked woodworking, woodworking publications, woodworking workbench options

  • The Iron Bridge, Ironbridge, Shropshire

    The Iron Bridge, Ironbridge, Shropshire

    The Iron Bridge, Ironbridge, Shropshire

    In the early eighteenth century, the only way to cross the Severn Gorge was by ferry . However, the industries that were escalating in the region of Coalbrookdale and Broseley needed a a lot more responsible crossing.

    Abraham Darby III, grandson of the 1st foundry operator and an ironmaster working at Coalbrookdale in the gorge, was commissioned to forged and build the bridge. The iron for the new bridge was solid at his foundry.

    Shares were issued to elevate the £3,200 expected, and Darby agreed to fund any surplus. While it experienced been predicted that 300 tons of iron would be needed (costing £7 a ton), in the close 379 tons ended up used, costing Darby and his corporation virtually £3,000. There would be lots of other charges to bear (masonry abutments, assembly, and many others.), so that the undertaking was significantly additional highly-priced than first envisaged. Darby bore most of the price overrun, and was in debt for the relaxation of his existence.

    Remaining the first of its form, the building had no precedent the strategy picked out to develop the framework was for that reason primarily based on carpentry. Each member of the frame was forged independently, and fastenings adopted all those utilized in woodworking, these types of as the mortise and tenon and blind dovetail joints, adapted as necessary to the different qualities of solid iron. Bolts were being made use of to fasten the 50 %-ribs alongside one another at the crown of the arch. Incredibly huge components were being needed to build a framework to span 100 ft soaring to 60 feet earlier mentioned the river. The premier sections were being the fifty percent-ribs, just about every about 70 ft prolonged and weighing 5.25 tons. The bridge contains additional than 800 castings of 12 simple types.

    The bridge was elevated in the summertime of 1779, and it was opened on New Year’s Day 1781.

    Posted by maisonburke on 2012-11-28 10:23:44

    Tagged: , Shropshire , Salop , Ironbridge , Abraham Darby III , Bridges , Bridging , Rivers , River Crossings , Severn River , Industrial Revolution , Iron , Heritage

    #furnishings #Diy #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, good woodworking, wood chairs, wood functioning applications, popular woodworking, woodworking books, woodworking workbench options

  • Iron Bridge

    Iron Bridge

    Iron Bridge

    The Iron Bridge Gorge, Coalbrookdale, Shropshire

    In 1773, Thomas Farnolls Pritchard wrote to a neighborhood ironmaster, John Wilkinson of Broseley, to suggest creating a bridge out of cast iron. By 1775, Pritchard experienced finalised the options, but he died in December 1777, only a month after do the job had begun.

    Abraham Darby III, who was the grandson of the to start with foundry owner and an ironmaster functioning at Coalbrookdale in the gorge, was commissioned to solid and construct the bridge. The iron for the new bridge was forged at his foundry.

    Shares were being issued to raise the £3,200 required, and Darby agreed to fund any extra. Whilst it had been predicted that 300 tons of iron would be essential (costing £7 a ton), in the end 379 tons ended up used, costing Darby and his corporation nearly £3,000. There would be a lot of other expenditures to bear (masonry abutments, assembly, and so on.), so that the venture was considerably a lot more pricey than to start with envisaged. Darby bore most of the value overrun, and was in credit card debt for the rest of his lifestyle.

    Being the first of its type, the building experienced no precedent the technique selected to generate the construction was thus based on carpentry. Every member of the frame was solid separately, and fastenings adopted those utilized in woodworking, this kind of as the mortise and tenon and blind dovetail joints, tailored as essential to the distinct attributes of solid iron. Bolts were being made use of to fasten the half-ribs collectively at the crown of the arch. Incredibly big pieces were desired to generate a composition to span 100 ft mounting to 60 feet above the river. The largest sections were being the 50 percent-ribs, each about 70 ft extended and weighing 5.25 tons. The bridge comprises extra than 800 castings of 12 essential kinds.

    The bridge was raised in the summer months of 1779, and it was opened on New Year’s Day 1781

    Carries Pedestrian targeted visitors

    Crosses River Severn

    Full duration 200 ft (61 m)

    Longest span 100 toes (30 m)

    Clearance down below 60 toes (18 m)

    Development start off 1775

    Development end 1779

    Opened 01-01-1781

    Coordinates 52.627245°N 2.485533° W

    en.wikipedia.org/wiki/The_Iron_Bridge

    en.wikipedia.org/wiki/Ironbridge_Gorge_Museums

    Posted by mickyman13 on 2013-10-13 21:28:06

    Tagged: , Iron Bridge Gorge , Iron Bridge , Gorge , Thomas Farnolls Pritchard , John Wilkinson , Abraham Darby III , Abraham Darby , River Severn , Coalbrookdale , Shropshire , Coalbrookdale Shropshire , The Iron Bridge Gorge , 400d , canon , britain , england , eos

    #furnishings #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wooden craft, wood planer, great woodworking, picket chairs, wood operating applications, well known woodworking, woodworking books, woodworking workbench options