Fret edges are the sharp, metal edges that run down the sides of a guitar neck. These edges can become rough or sharp over time, which can be uncomfortable or even painful when playing the guitar. One solution to this problem is to file down or clean up the fret edges.
To clean up fret edges, you will need a few basic tools. These include a small file, sandpaper, and masking tape. You may also want a set of needle-nose pliers or a pair of wire cutters to remove any excess wire that sticks out from the fret edges.
The first step in cleaning up fret edges is to identify which frets need attention. You can do this by running your fingers along the sides of the neck and feeling for any rough edges or sharp spots.
Once you have identified the problem areas, you will want to protect the guitar’s finish with masking tape. Simply wrap a piece of tape around the neck, covering the entire fretboard, and make sure it is firmly in place.
Next, take your small file and gently file down any rough or sharp spots on the fret edges. Be careful not to file too much, as it can cause the frets to become uneven or even damage the guitar’s neck.
After you have filed down the rough spots, take a piece of sandpaper and gently sand the fret edges, smoothing out any remaining rough spots. Be sure to use a very fine-grit sandpaper, as a coarser sandpaper can damage the fretboard and the finish of the guitar.
Finally, use your needle-nose pliers or wire cutters to remove any excess wire that sticks out from the fret edges. This will ensure that the fret edges are smooth and comfortable to play on.
Overall, cleaning up fret edges is a simple and easy task that can make a big difference in the feel and playability of your guitar. With the proper tools and a little bit of patience, you can have your guitar feeling and playing like new again in no time.
Posted by Serge Marx on 2010-08-29 09:09:50