Absolutely sure, it seems to be tranquil now, but this was a spring-loaded nightmare of a task to glue-up appropriately. I clamped the board to the drill press table (identical depth) with spacer blocks to elevate the clamp pads up bigger than the area so I would have area to snake in the glue-coated edge band in between the board edge and strap clamp. This was to pull out the slight warp in the board, receiving it flat with the drill press table’s surface area.
Then I place 1/8″ aluminum blocks close to the perimeter on the drill push table, taping them down at their corners. This locked in the disc, but also provided a pad on which the edge banding would sit to increase it up 1/8″, so it would adhere up even much more about the edge, as a lip to retain merchandise on the lazy susan. I figured I might then somehow sand/airplane/whichever away the more disc below the edge-banding, but later, it seemed like it would really glance wonderful to have that recess beneath. I’m not certain however.
At any price, I had to tighten this thing down extra than I felt relaxed performing, and it was genuinely difficult to get it all accomplished with only 2 hands, but in the conclusion, I prevailed. Then I went at the rapidly-drying glue with a scraper and hot, damp rag to wipe up the extra glue.
I are unable to hold out to unclamp it tomorrow and see what I have! Then it is really on to ending. Heaps of ending…
Posted by gfixler on 2009-02-22 11:59:19
Tagged: , Ronne , maple , lazy susan , wood task , woodwork , woodworking , woodworking career
#furniture #Do-it-yourself #woodwork #woodworking #freedownload#woodworkingprojects #woodsmith ,wood craft, wood planer, good woodworking, picket chairs, wood working instruments, well known woodworking, woodworking textbooks, woodworking workbench options